User manual SONY KV-32LS60B

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service centre. If the plug supplied is not suitable for the socket outlet in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] Refer to the table below for explanations of each option. How to use With the TV in PAP mode set the `iDual Sound' feature to `PAP' (Refer to `Sound Adjustment menu' section for more information. ) Press the numbered buttons or PROG +/- buttons to select the required channel. Alternatively, press the / button to view pictures from equipment connected to the AV sockets of the TV. Alternatively, press the / button to view pictures from equipment connected to the AV sockets of the TV. Press the B or b buttons to change the size of the two screens. The pictures that the TV receives may be in one of several formats (e. You can alter the TV screen mode manually to suit the broadcast you are watching*. Button on the remote control to display the Screen Mode menu on the TV button repeatedly (or use the V and v buttons) to select one of the following For watching cinemascopic (letter box format) broadcasts (e. This mode is a compromise between the 4:3 and Wide modes. In `Smart', `Zoom' and `14:9' modes, parts of the bottom and top of the picture may be cut off. When set to On you will not miss any of the recording should there be a change in the TV programme schedule. This only works if the selected channel broadcasts a VPS/PDC signal. With long play you can record twice as much on a videotape. Press the OK button to select which VCR you wish to programme. This TV contains a menu system which is based on a series of on screen displays. These displays help you get the most from your TV, from customising the picture and sound to accessing advanced features. Use the following buttons on the remote control to operate the TV menu system: Use the following buttons to operate the menu: - Press the v or V buttons to highlight the required menu or option. This menu allows you to customise the picture. highlight the required option and press b to select. The table below explains each option and how to use it. Option Picture Mode This option allows you to select one of four picture modes. [. . . ] Press the / button on the remote control until the correct symbol for your equipment appears on the TV screen (see table below). The picture (if any) from this equipment appears on the TV screen. To avoid picture distortion do not connect equipment to the G and H sockets at the same time. The remote control supplied with your TV operates not only Sony VCRs and DVD players, but also those made by other manufacturers. [. . . ]