User manual SONY KV-32LS65E

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service centre. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] 2 Press the or button to select the new programme number position for your selected broadcast channel, then press . 3 Repeat steps b)1 and b)2 if you wish to change the order of the other broadcast channels. Your TV is now ready for use Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: PICTURE ADJUSTMENT The "Picture Adjustment" menu allows you to alter the picture adjustments. To do this: after selecting the item you want to alter press , then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. This menu also allows you to customise the picture mode based on the programme you are watching: Personal (for individual settings). Select Reset and press OK to reset the picture to the factory preset levels. SOUND ADJUSTMENT The "Sound Adjustment" menu allows you to alter the sound adjustments. To do this: after selecting the item you want to alter, press . Then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. This menu also contains two submenus as following: Mode Personal (for individual settings) Rock Pop Jazz Dolby* Virtual: Off: On: Off: On: Normal. AV PRESET The "AV Preset" option in the "Set Up" menu allows you to designate a name to the external equipment you have connected to the sockets of this TV. To do this: 1 After selecting the option, press , then press or to select the input source you wish to name (AV1 and AV2 are for the rear Scarts and AV3 for side connectors). 2 In the label column automatically appears a label: a) If you want to use one of the 6 predefined labels (CABLE, GAME, CAM, DVD, VIDEO or SAT), press or to select the desired label and finally press OK to store. B) If you want to set a different label, select Edit and press . Then with the first element highlighted, press or to select a letter, number or "-" for a blank, then press to confirm this character. Select the other four characters in the same way and finally press OK to store. Source one by one to the programme order of your choice. Press or to select on which programme number you want to preset the broadcast channel (for VCR, select programme number "0"). Then, press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store. [. . . ] Therefore, please refer to code table included with the remote control for latest code set. Press the Media Selector button on the remote control repeatedly until the required VCR or DVD green light is lit. If Media Selector is on TV position, code numbers will not be stored. Before the green light goes out, press and hold the yellow button for approximately 6 seconds until the green light starts flashing. [. . . ]