User manual SONY KV-34FQ75K

[. . . ] Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Never push objects of any kind into the set as this could result in a fire or electric shock. Never spill liquid of any kind on the set. [. . . ] Input three digits for the page number using the numbered buttons on the remote control. If you make a mistake, type in any three digits then re-enter the correct page number. Selecting the next or preceding page Press the or buttons on the remote control to select the previous or next page. Selecting a sub page A teletext page may consist of several sub pages. In this case an information line is displayed, showing the number of subpages. Using colour buttons to access pages (Fastext) (only available if the TV station broadcasts Fastext signals) When the colour coded menu appears at the bottom of a page, press a coloured button on the remote control (green, red, yellow or blue) to access the corresponding page. using the feature `Page Catching' 1. Press the numbered buttons on the remote control to select a teletext page which has several page numbers on it (eg the index page). Press v or V to select your chosen item on the screen then press B to display the relevant sub menu. Top/Bottom/Full The Top/Bottom/Full sub menu allows you to enlarge different sections of the Teletext page. Text Clear* *available on Teletext Only and Mix modes (Refer to `Switching Teletext on and off') Text Clear is a function that displays a TV channel while a Teletext page is being searched for. Once the text page has been found a blue will appear in the top left hand corner of the screen. Enter the desired page number using the numbered buttons on the remote control. Finally, press the OK button to store the new adjustment. If you want to store the new setting, you need to set the Equaliser mode to `Personal'. Personal mode permanently stores the setting, all other modes (Vocal, Jazz, Rock, Pop) store only until the next mode change. Balance b B V v V v V v More left More right Off: On: Off: On: Normal For music broadcasts Normal Spatial acoustic effect Off: Volume level changes according to the broadcast signal. On: Volume level of the channels will stay the same independent of the broadcast signal (eg in the case of advertisements). When NICAM stereo is being broadcast, the indication NICAM appears briefly on the screen. Can also adjust the volume level of additional equipment connected to the RCA sockets on the rear of the TV. Only available when PAP feature is selected: V Stereo: The sound of one screen comes through both the TV loudspeakers and the headphones. V PAP: The sound of the left screen comes through the TV loudspeakers, the sound of the right screen is selectable via headphones. [. . . ] If the equipment does not have a certain function, the corresponding button on the remote control does not work. Flat display Trinitron tube, noise reduction, DRC 50Hz picture, DRC 100Hz picture, PAP, PAT, M-PIP, graphic equaliser, 2000 page TEXT memory, personal ID, sleep timer, NexTView, Digital Comb Filter, second tuner. Design and specifications are subject to change without notice. Here are some simple solutions to problems which may affect the picture and sound. [. . . ]