User manual SONY KV-36FS70K

[. . . ] Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Never push objects of any kind into the set as this could result in a fire or electric shock. Never spill liquid of any kind on the set. [. . . ] Once the text page has been found a blue symbol appears in the top left corner of the screen. You can call up a time-coded page such as an alarm page at a time specified by you. After you have displayed the Time Page sub menu: Press the numbered buttons on the remote control to enter the three digits of the desired page. Press the numbered buttons again to enter the four digits of the desired time. Page Overview *only available if TOP-Text is transmitted by the TV station In this menu the TOP-Text pages are divided into two columns, the first column showing `blocks' of pages and the second showing `groups' of pages. Press b or B to select the first or second column. These displays will help you get the most from your TV, helping you to change picture and sound settings, to alter the size of the TV picture and to rearrange the TV channels etc. Adjusting the picture and sound The picture and sound are preset at the factory. You can however adjust them to suit your own taste. If this is not the case: (a)Press the v or V buttons to select `Front L. Press the v or V buttons to select one of the following speaker modes then press the OK button to store: `Normal' `Phantom' `Wide' `3CH Normal' `3CH Wide' all speakers are activated centre speaker is switched off wider bandwidth from centre speaker surround speakers are switched off surround speakers are switched off, centre speaker carries full frequency response. You have the choice between 15ms for big rooms, 20ms or 25ms for standard rooms and 30ms for small rooms. Press the v or V buttons to select `Auto Surround' then press B to enter the `Auto Surround' sub menu. Press the v or V buttons to select for the `Features' menu then press B to enter the `Features' menu. Repeat steps 3-5 if you wish to select any of the other items. V Off: Size of picture does not automatically adjust. Normal: Size of picture automatically adjusts according to information from the broadcaster. V Full: The TV can automatically adjust the picture size to eliminate any dark areas on the TV picture (as shown below): Format Correction* V Off : 4:3/14:9 is selected (*only if Auto Format is v On : Smart mode is selected automatically for 4:3/14:9 broadcasts set to `Normal' or `Full') Sleep Timer You can select a time after which the TV switches itself into standby mode. V TV audio/video signal from the aerial AV1 audio/video signal from scart 1 AV2 audio/video signal from scart 2 AV3 audio/video signal from scart 3 v AV4 audio/video signal from connectors on front of TV This feature allows you to change the size of the TV picture. Press the button on the remote control repeatedly or use the v or V buttons to select one of the following formats then press the OK button to confirm your selection: Smart 4:3 14:9 Zoom Wide imitation of wide screen effect for 4:3 broadcasts. Conventional 4:3 picture size, full picture information. Compromise between 4:3 and 16:9 picture size. [. . . ] If the equipment does not have a certain function, the corresponding button on the remote control does not work. RM-892 remote control (1) IEC designated size AA batteries (2) Surround speaker (2) Surround speaker lead (2) Flat display Trinitron tube, noise detection, DRC 50Hz picture, DRC 100Hz picture, PAP, PAT, graphic equaliser, personal ID, sleep timer, NexTView, Dolby Surround, Digital Comb Filter, second tuner. Design and specifications are subject to change without notice. Here are some simple solutions to problems which may affect the picture and sound. [. . . ]