User manual SONY KV-36FV300

[. . . ] Address Mapping The position of the addresses in the OSDA is shown in the following diagram. the position values of the DPW are set to '0'. If other values are set, the complete combination will be scrolled. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. [. . . ] Address Mapping The position of the addresses in the OSDA is shown in the following diagram. the position values of the DPW are set to '0'. If other values are set, the complete combination will be scrolled. To record programmes* * (only with Smartlink VCRs) 1. Connect your Smartlink VCR to the AV2 socket on your TV. To set up the VCR: then press the OK button to download the information to your VCR. With this setting on you have the guaranteed recording of the whole broadcast should there be a change in the TV programme. This only works if the selected channel broadcasts a VPS/PDC signal. Speed Press V to select `Speed' then press the OK button repeatedly to select between `SP' for standard play or `LP' for longplay. With longplay you can record twice as much on a videotape. VCR Setup Press V to select `VCR Setup' then press the OK button repeatedly to select which VCR you wish to programme, namely `VCR1' or `VCR2'. In this menu the TOP-Text pages are divided into two columns, the first column showing `blocks' of pages and the second showing `groups' of pages. Press b or B to select the first or second column. You can manually select which channel you wish to watch, either full-screen or in the PIP mode. Press the OK button again to display the selected channel or press mode from the TV screen. This PAP feature divides the screen into two for watching two channels simultaneously (with a video source on one if you want). The sound of the left screen comes through the TV loudspeakers, the sound of the right screen is selectable via headphones. Switching PAP on and off Press once to display the screens and twice to switch PAP off. Selecting sound for the headphones With PAP switched on, refer to the `Adjusting the picture and sound' section of this manual and set `i Dual Sound' to `PAP'. Zooming the screens Press the b or B buttons to change the size of the two screens. These displays will help you get the most from your TV, helping you to change picture and sound settings, to alter the size of the TV picture and to rearrange the TV channels etc. It is only possible to switch the set back on by pressing a button on the remote control. [. . . ] When connecting external hi-fi equipment, you can adjust the volume level by adjusting the headphones setting in the sound menu - please refer to the `Adjusting the picture and sound' section of this manual. For Smartlink you need: * * A VCR which supports Smartlink, NexTView Link, Easy Link or Megalogic etc. The features of Smartlink are: * * * Tuning information such as the channel overview are downloaded from the TV set to the VCR. With NexTView you can programme your VCR easily. [. . . ]