User manual SONY KV-AZ212M91

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. I (Headphone) FM Radio Tuning Range Intermediate Frequency Picture tube Tube size (cm) Screen size (cm) Dimensions (w/h/d, mm) Mass (kg) Design and specifications are subject to change without notice. Dangerously high voltages are present inside the TV. Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. [. . . ] Keep external speakers or other equipment away from the TV. Do not move the TV while the TV is turned on. (main power) on the TV to turn off the TV for about 15 minutes, then turn it on again to demagnetize the TV. Or Stereo broadcast sound switches on and off or is distorted. The 1 (standby) indicator on your TV flashes red several times after every three seconds. The TV screen sometimes goes blank for slightly longer than usual during channel change. Connect a separate FM antenna and the TV channel source through an antenna selector (switch) to your TV (see E). â· Count the number of times the 1 (standby) indicator flashes. Changes in room temperature sometimes make the TV cabinet expand or contract, causing a noise. A small "boom" sound is heard when the TV is turned on. /1 Description Turn off temporarily or turn on the TV. Jump to last program number that has been watched for at least five seconds. To select quickly, press and hold until the desired program number appears. For program numbers 10 and above, enter the second digit within two seconds. Select sound mode options with a 5-Band Graphic Equalizer display: "Dynamic", "Standard", "Custom"*. * When the "Custom" mode is selected, you can receive the last adjusted sound settings from the "Sound Adjustment" option in the menu. * When the "Custom" mode is selected, you can receive the last adjusted picture settings from the "Picture Adjustment" option in the menu. Set TV to turn on automatically according to the desired period of time (max. The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. (Sleep Timer) , , , , , , , , (red, green, yellow, blue) PIP operations Set TV to turn off automatically according to the desired period of time (max. WOW and TruSurround technologies are incorporated under license from SRS Labs, Inc. [. . . ] After selecting "Manual Program", select the program number to which you want to preset a channel. (1) Make sure "Program" is selected, then press . (2) Press V or v until the program number you want to preset appears on the menu, then press . (1) Make sure either "VHF Low", "VHF High" or "UHF" is selected, then press . [. . . ]