User manual SONY KV-BZ212M81

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. Dangerously high voltages are present inside the TV. Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. â· To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. [. . . ] Jump to last program number that has been watched for at least five seconds. To select quickly, press and hold until the desired program number appears. For program numbers 10 and above, enter the second digit within two seconds. select picture mode options: "Vivid" , "Standard" , "Custom"*. * When the "Custom" mode is selected, you can receive the last adjusted picture settings from the "Picture Adjustment" option in the menu. Description Set TV to turn on automatically according to the desired period of time (max. The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. Set TV to turn off automatically according to the desired period of time (max. (red, green, yellow, blue) PIP operations , , V, v, B, b Not function for your TV. How to use WEGA GATE (2) Press (or b) to confirm your selection or go to the next level. And V, v, B, b buttons on the top control panel can also be used for the You are able to change the settings of your TV from "Settings" in WEGA GATE menu. The following is an overview of the items that can be adjusted. When a feature is dimmed in the menu, it is not selectable. Make sure the "Picture" icon ( ) is selected, then press . Press V or v to select "On", then press To cancel, select "Off", then press . "Intelligent Picture Signal Level" indicator will be displayed, followed by picture improvement when you change the program number or the input mode. Red amber green (weak) (average) (good) Press V or v to select "On", then press . * You can adjust the setting to your personal preference in the "Picture Adjustment" and "Color Temperature" options only when the "Custom" mode is selected. Press V or v to select either "Picture" (contrast), "Brightness", "Color", "Hue" (color tones) or "Sharpness", then press . [. . . ] If there is no Teletext broadcast, "100" is displayed at the top left corner of the screen. Press the number buttons to enter the three-digit page number of the desired Teletext page. If you make a mistake, reenter the correct page number. Each time you press , the Teletext display changes as follows: Enlarge upper half t Enlarge lower half t Normal size. [. . . ]