User manual SONY KV-DZ29M91

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. I (Headphone) Picture tube Tube size (cm) Screen size (cm) Dimensions (w/h/d, mm) Mass (kg) Design and specifications are subject to change without notice. Dangerously high voltages are present inside the TV. Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. [. . . ] TV cannot receive stereo broadcast sound or stereo broadcast sound switches on and off or is distorted. The 1 (standby) indicator on your TV flashes red several times after every three seconds. Count the number of times the 1 (standby) indicator flashes. contact your nearest Sony service center. The TV screen sometimes goes blank for slightly longer than usual during channel change. Some shooting games which involve pointing a light beam at the TV screen with an electronic gun or rifle cannot be used with your TV. For details, see the instruction manual supplied with the video game software. Changes in room temperature sometimes make the TV cabinet expand or contract, causing a noise. A small "boom" sound is heard when the TV is turned on. The visible lines that sometimes appear on your TV screen are shadows from the damper wires used to stabilize the aperture grille of the Trinitron picture tube. Select sound mode options with a 5-Band Graphic Equalizer display (see L). Jump to last program number that has been watched for at least five seconds. To select quickly, press and hold until the desired program number appears. If the stereo sound is noisy when receiving a stereo program, select "Mono". The sound becomes monaural, but the noise is reduced. For program numbers 10 and above, enter the second digit within two seconds. Select sound mode options with a 5-Band Graphic Equalizer display: "Dynamic", "Standard", "Custom"* (see L). * When the "Custom" mode is selected, you can receive the last adjusted sound settings from the "Sound Adjustment" option in the menu. * When the "Custom" mode is selected, you can receive the last adjusted picture settings from the "Picture Adjustment" option in the menu. Set TV to turn on automatically according to the desired period of time (max. The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. [. . . ] The adjusted settings will be received when you select "Custom". â· Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. â· You may display the settings directly by using the SOUND MODE button on the TV button on the remote control (see H). Change the size of the picture when receiving wide-mode (16:9) picture signal. [. . . ]