User manual SONY KV-EF29M80

[. . . ] Dangerously high voltages are present inside the TV. Do not open the cabinet and the rear cover of the TV. Do not operate the TV if any liquid or solid object falls into it. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] notes · You can use only the number buttons on the remote to change the program position of the main screen when you display the nine sub screens. You can only hear the sound of the main screen when viewing multiple programs on the nine sub screens. You can enjoy stereo sound or bilingual programs of NICAM and A2 (German) stereo systems. Press A/B repeatedly until you receive the sound you want. The on-screen display changes to show the selected sound and the u/ Â/ indicator lights up. If the signal is very weak, the sound becomes monaural automatically. If the stereo sound is noisy when receiving a NICAM program, select "MONO". The sound becomes monaural, but the noise is reduced. If the sound is distorted or noisy when receiving a monaural program through the (antenna) terminal Press A/B repeatedly until "MONO" appears on the screen while the u/Â/ indicator is off. You cannot receive stereo broadcast signal when the TV is in the "MONO" setting. TV stations broadcast an information service called Teletext via some TV channels. Teletext allows you to receive various information, such as weather forecasts or news. If there is no Teletext broadcast, "100" is displayed at the top left corner of the screen. To display a Teletext page on the TV picture check the contents of a Teletext service Do this Press . Each time you press , the screen changes as follows: Teletext n Teletext and TV n TV. Press the number buttons to enter the three-digit page number of the desired Teletext page. * If you make a mistake, reenter the correct page number. Each time you press A/B , the Teletext display changes as follows: Enlarge upper half n Enlarge lower half n Normal size. 1 Enter the Teletext page number that you want to refer to, then press . Wait for a Teletext page while watching a TV program * You can also select a Teletext page of any page number that appears in the colored column at the bottom of the screen using the corresponding colorcoded button on the remote. This feature allows you to quickly access a Teletext page that uses FASTEXT. When a FASTEXT program is broadcasted, the colored menus appear at the bottom of the screen. [. . . ] Press V or v to move the cursor (") to ( ), then press ENTER. Press V or v to move the cursor (") to TV SYS, then press ENTER. Press V/b/v/B until your local TV system appears on the menu, then press ENTER. Press V or v to move the cursor (") to MANUAL PROGRAM, then press ENTER. [. . . ]