User manual SONY KV-EF34M90

[. . . ] To prevent fire or shock hazard, do not expose the TV to rain or moisture. Do not operate the TV if any liquid or solid object falls into it. Do not install the TV in a confined space, such as a bookcase or built-in cabinet. Clean the TV with a dry and soft cloth. [. . . ] note · The DRC-MF mode is not selectable when the "GAME MODE" or PictureIn-Picture ("PIP") mode is turned "ON". You can display and select six of your favorite channels directly from your TV screen. Press the number button from 1 to 6 to select the desired channel. To program your favorite channels, see Adjusting each channel settings (PROGRAM SETUP) on page 36. -- "PIP" With the Picture-in-Picture (PIP) feature, you can display a sub screen within the main picture of different TV programs or video inputs. You can also display the sub screen and exchange pictures between the main and sub screens using the menu (see Changing the "PIP" setting on page 34). When you display a video input on the sub screen at a faster/slower speed, the picture may be disrupted depending on the VCR type. If you display different color systems on the main screen and the sub screen, the size of the sub screen may be different and the sub screen picture may be disrupted. This does not indicate a malfunction of the TV. Listening with surround sound The surround feature enables you to enjoy the sound effects of a concert hall or movie theater. To listen to the surround sound that spreads out to the rear of a room. * You can also select a Teletext page that appears in the colored columns at the bottom of the screen using the corresponding color-coded buttons on the remote. This feature allows you to quickly access a Teletext page that uses FASTEXT. When a FASTEXT program is broadcast, colored menus appear at the bottom of the screen. The color of each menu , corresponds to the color-coded buttons on the remote (red green , yellow , and blue ). The menu page appears on the screen after a few seconds. You can use the supplied remote to operate Sony video equipment such as Beta, 8 mm, VHS, MDP, CD or DVD. /1, press the following number combinations to enter the equipment's code number (see the chart below. If your video equipment is furnished with a COMMAND MODE selector, set this selector to the same position as the setting code. If the equipment does not have a certain function, the corresponding button on the remote will not operate. When you remove the batteries, the code number may revert to the factory setting. To turn on/off record play stop fast forward (M) rewind the tape (m) pause search the picture forward (M) or backward (m) Press VIDEO ? [. . . ] Pressing RESET will set your TV to the factory setting, but certain problems may be solved. If the sound of all the channels are noisy, display the "CH PRESET" menu and select "AUTO PROGRAM" to preset the channels again. If the sound of some channels is noisy, select the channel, then display the "CH PRESET" menu and select the appropriate TV system ("TV SYS"). The power cord, antenna or VCR is not connected. [. . . ]