User manual SONY KV-SW252M91

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. Dangerously high voltages are present inside the TV. Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. â· To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. [. . . ] To listen to dynamic and clear sound that emphasizes both the low and high tones. Sound that emphasizes voice and high tones. The last adjusted sound setting from the "Sound Adjustment" option in the menu (see page 18). You are able to listen to the FM radio stations using your TV. To exit from FM Radio mode: Press WEGA GATE button, select the desired items: "TV" or "External Inputs", then press . You can also use the 1-9 buttons on the remote control to directly select the desired preset FM radio station. The preset number and label will not be displayed. You can only operate V, v, B and b functions using the remote control buttons in FM Radio mode. â· The available radio frequency is only for temporary listening pleasure and cannot be stored in the memory. When a FM stereo program has static noise, press A/B until "Mono" appears. There will be no stereo effect, but the noise will be reduced. You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. If the stereo sound is noisy when receiving a stereo program, select "Mono". The sound becomes monaural but the noise is reduced. Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. Each time you press , the screen changes as follows: Teletext t Teletext and TV t TV. If there is no Teletext broadcast, "100" is displayed at the top left corner of the screen. Press the number buttons to enter the three-digit page number of the desired Teletext page. If you make a mistake, reenter the correct page number. Each time you press , the Teletext display changes as follows: Enlarge upper half t Enlarge lower half t Normal size. (red, green, yellow, blue) Stand by for a Teletext (1) Enter the Teletext page number that page while watching you want to refer to, then press . [. . . ] (1) Make sure "Program" is selected, then press . (2) Press V or v until the program number you want to preset appears on the menu, then press . (1) Make sure either "VHF Low", "VHF High" or "UHF" is selected, then press . (2) Press V or v until the desired channel's broadcast appears on the TV screen, then press . [. . . ]