User manual SONY KV-SW292M91K

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. Dangerously high voltages are present inside the TV. Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. â· To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. [. . . ] Press V, v, B, or b to adjust the microphone volume and echo level of the microphone sound, then press . If you want to reduce the vocal of the singer or speaker, select "On" from "Vocal Reducer" and press (effective for non-karaoke stereo source only). Select "Audio Input Fix" and press , then press V or v to select the input connected to the audio equipment from which you want to hear the sound: "Video1", "Video 2", "Video 3", "Video 4" or "DVD". To revert to the original sound source, select "Off", then press . Selecting "Reset" will set your TV to the factory settings (except for "Audio Input Fix"). Be sure to adjust the microphone and echo level to the minimum level before plugging in and disconnecting the microphone. â· For your own safety, do not use or plug in the microphone during lightning storms. â· Keep microphone away from the speakers and adjust its volume to avoid acoustic feedback (howling) and distortion. You are able to listen to the FM radio stations using your TV. To exit from FM Radio mode: Press WEGA GATE button, select the desired items: "TV" or "External Inputs", then press . You can also use the 1-9 buttons on the remote control to directly select the desired preset FM radio station. The preset number and label will not be displayed. You can only operate V, v, B and b functions using the remote control buttons in FM Radio mode. â· The available radio frequency is only for temporary listening pleasure and cannot be stored in the memory. When a FM stereo program has static noise, press A/B until "Mono" appears. There will be no stereo effect, but the noise will be reduced. You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. If the stereo sound is noisy when receiving a stereo program, select "Mono". The sound becomes monaural but the noise is reduced. Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. To display a Teletext page on the TV picture Do this Press . [. . . ] (2) Press V or v until the program number you want to preset appears on the menu, then press . Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals. â· The component video terminals on your DVD player are sometimes labeled Y/CB/CR, Y/PB/ PR, Y/Cb/Cr or Y/B-Y/R-Y. â· If you select "DVD" on your TV screen, the signal from the T (monitor output) jacks will not be output properly. [. . . ]