User manual SONY KV-SZ29M91K

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. Dangerously high voltages are present inside the TV. Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. [. . . ] , photos or video stories) with narration and favorite background music by using the Party Mode feature. You can begin singing or speaking from the microphone at the last TV volume setting. You can press A/B button on remote control to switch between left ("L") or right ("R") channel sound for VCD karaoke source only (either music or vocal) when video input is selected and "Audio Input Fix" is set to "Off". Press V, v, B or b to adjust the microphone volume and echo level of the microphone sound, then press . If you want to reduce the vocal of the singer or speaker, select "On" from (effective for non-karaoke stereo source and "Vocal Reducer" and press when "Audio Input Fix" is "Off" only). Select "Audio Input Fix" and press , then press V or v to select the input connected to the audio equipment from which you want to hear the sound: "Video 1", "Video 2" or "DVD". To revert to the original sound source, select "Off", then press . Selecting "Reset" will set your TV to the factory settings (except for "Audio Input Fix"). Be sure to adjust the microphone and echo level to the minimum level before plugging in and disconnecting the microphone. For your own safety, do not use or plug in the microphone during lightning storms. Keep microphone away from the speakers and adjust its volume to avoid acoustic feedback (howling) and distortion. You are able to listen to the FM radio stations using your TV. To exit from FM Radio mode: Press WEGA GATE button, select the desired items: "TV" or "External Inputs", then press . You can also use the 1-9 buttons on the remote control to directly select the desired preset FM radio station. The preset number and label will not be displayed. You can only operate V, v, B and b functions using the remote control buttons in FM Radio mode. The available radio frequency is only for temporary listening pleasure and cannot be stored in the memory. When a FM stereo program has static noise, press A/B until "Mono" appears. There will be no stereo effect, but the noise will be reduced. You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. If the stereo sound is noisy when receiving a stereo program, select "Mono". The sound becomes monaural, but the noise is reduced. [. . . ] If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals. The component video terminals on your DVD player are sometimes labeled Y/CB/CR, Y/PB/ PR, Y/Cb/Cr or Y/B-Y/R-Y. If you select "DVD" on your TV screen, the signal from the T (monitor output) jacks will not be output properly. [. . . ]