User manual SONY KV-VF21M70

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages are present inside the set. If the unit is brought directly from a cold place to a warm place, moisture may condense on the video head drum. [. . . ] The QUICK TIMER button changes the following when turned clockwise or counterclockwise · When setting the start time: The hour increases or decreases by one hour. When the Quick Timer is not set: The display for setting the Quick Timer appears. When the clock is not set: The CLOCK SET display appears. note · When you turn QUICK TIMER to move the cursor to OK and then press it, one of the following messages may appear depending on the cassette used. Change the settings: (1) Turn QUICK TIMER to move the cursor to CHANGE, then press QUICK TIMER. (2) Change the settings according to steps 2 through 7 of "Recording using QUICK-TIMER" on pages 22 and 23. To cancel the Quick Timer settings Turn QUICK TIMER to move the cursor to CLEAR, then press QUICK TIMER. note · You cannot cancel the Quick Timer settings with the remote control. You can preset up to five programs within a one-month period. Make sure that the loaded cassette has its safety tab intact. ⷠMake sure that the video TV does not enter the timer recording standby mode (the Quick Timer indicator on the video TV should not be lit. Example: How to record a program broadcast on program position 6 from 21:00 to 22:00 on Sunday, 28th November 1999. Set the recording start time, recording stop time, program position/input (1 or 2) and tape speed in the same way as in step 2. Press < or , to move the cursor to NEXT for other programs, then press ENTER. Press < or , to move the cursor to OK after setting your desired programs, then press ENTER. If you have made a mistake during timer setting Press < to go back to the previous position and correct the setting. You can preset your video TV to record the same program every day of the week (daily recording) or the same program on the same day every week (weekly recording). Press m in step 2 until the desired setting appears in the "DATE" position. With each press, the setting changes as follows: 27 (today) t MON­SUN t MON­SAT t MON­FRI t EVERY SAT t EVERY FRI t . Using the video TV before timer recording starts Press ON/OFF to turn off the TIMER REC indicator on the front of the video TV. Remember to press ON/OFF again to make the TIMER REC indicator light up after setting the recording time. To add, change or clear the settings, follow steps 2 through 4. [. . . ] If the sound of all the channels is abnormal, display the TV SET UP menu and select the appropriate TV system (TV SYS), then preset the channels again. (pages 11 and 12) · If the sound of some channels is abnormal, display the MANUAL PROGRAM menu in the TV SET UP menu and select the appropriate TV system (TV SYS) (page 30). Do not use a hair dryer or other equipment near the video TV. Locate external speakers or other equipment away from the video TV. [. . . ]