User manual SONY KV-XJ29M80

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. Dangerously high voltages are present inside the TV. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children's safety, do not leave children alone with the TV. [. . . ] For double digit numbers, press -, then the number (e. To Turn off temporarily Turn off completely Mute the sound Watch the video input (VCR, camcorder, etc. ) Jump back to the previous program number Display the on-screen information* Adjust the volume of all program numbers automatically Adjust the picture position when it is not aligned to the TV screen Press ?SELECT repeatedly until "INTELLIGENT VOL" appears, then press + or ­ to select "ON". SELECT repeatedly until "PIC ROTATION" appears, then press + or ­ to adjust the alignment of the picture position. * The picture, sound, and either the program number or video input are displayed. The on-screen display for the picture and sound information disappears after about three seconds. You can also use SELECT and 2 +/­ on the TV to select the on-screen display language. Press until the desired period of time appears. The Wake Up timer starts immediately after you have set it. Select the program number or video input you want to display when you wake up. /1 or set the Sleep timer if you want the TV to turn off automatically. The indicator on the TV lights up orange when the TV goes into standby mode. Press until "WAKE UP TIMER: OFF" appears or turn off the TV's main power. note · If no buttons or controls are pressed for more than two hours after the TV is turned on using the Wake Up timer, the TV automatically goes into the standby mode. To continue watching the TV, press any button or control on the TV or the remote. Press until the desired period of time appears. The Sleep timer starts immediately after you have set it. Press until "SLEEP TIMER: OFF" appears or turn the TV off. Customizing the picture and sound You can customize the picture and sound by selecting the picture and sound modes or by adjusting its settings. [. . . ] If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer . Press SELECT until "MANUAL PROGRAM" appears on the screen, then preset the channel again. If the sound of all the channels are noisy, or channel presetting check the TV system (TV SYS) setting, is inappropriate or then press AUTO PROGR to preset the incomplete. [. . . ]