User manual SONY KV-XR25M81

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. Dangerously high voltages are present inside the TV. Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. ⷠTo avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. [. . . ] Press the number buttons to enter the three-digit page number of the desired Teletext page. If you make a mistake, reenter the correct page number. Each time you press , the Teletext display changes as follows: Enlarge upper half t Enlarge lower half t Normal size. X (red, green, yellow, blue) Stand by for a Teletext (1) Enter the Teletext page number that page while watching you want to refer to, then press . a TV program (2) When the page number is displayed , press to show the text. Select a FASTEXT menu or the colored boxes turn off Teletext Press x (red, green, yellow and blue) that corresponds to the desired menu or page number. The FASTEXT feature can be used only when the FASTEXT broadcast is available. The MENU button lets you open a menu and change the settings of your TV. the following is an overview of the menu system. Picture icon Sound icon Timer icon Channel Setup icon Setup icon Menu level 1 Menu level 3 Menu level 2 Level 3/Function Select the picture mode: "Dynamic" t "Standard" t "Soft" t "Personal" "Picture Adjustment" Adjust the "Personal" option: "Picture" t "Brightness" t "Color" t "Hue" t "Sharpness" t "Reset" "Color Temperature" Adjust white color tint: "Cool" t "Neutral" t "Warm" "VM" Sharpen the edges of each object: "High" t "Low" t "Off" "Intelligent Picture" Optimize picture quality: "On" t "Off" "Sound" "Mode" Select the sound mode: "Dynamic" t "Drama" t "Soft" t "Personal" 17 "Sound Adjustment" Adjust sound frequency settings of "Personal" option: "Adjust" t "Reset" "Balance" Select to emphasize the left and right speakers. Level 1 "Timer" Level 2 "Sleep Timer" "Wake Up Timer" "Channel Setup" "Auto Program" "Manual Program" "TV System" "Program Label" "Program Block" "Setup" "Language" "Picture Rotation" "Wide Mode" "Video Label" "Color System" Level 3/Function Set TV to turn off automatically. How to use the menu (or b) to Press confirm your selection and go to the next level. If you want to exit from Menu level 2 to Menu level 1, press V or v until the return icon ( ) is highlighted, then press . ⷠThe MENU, t and 2 +/­ buttons on the TV front panel can also be used for the operations above (see page 8). The "Picture" menu allows you to adjust the picture settings. Make sure the "Picture" icon ( selected, then press . Press V or v to select "On", then press To cancel, select "Off", then press . * You can adjust the setting to your personal preference in the "Picture Adjustment", "Color Temperature" and "VM" options only when the "Personal" mode is selected. Press V or v to select either "Picture" (contrast), "Brightness", "Color", "Hue" (color tones) or "Sharpness", then press . Selecting "Reset" will set your TV to the factory setting. [. . . ] (1) Make sure either "VHF Low", "VHF High" or "UHF" is selected, then press . (2) Press V or v until the desired channel's broadcast appears on the TV screen, then press . (2) Press V or v until the sound becomes normal, then press If you are not satisfied with the picture and sound quality, you may be able to improve them by using the "Fine" tuning feature. (3) Press V, v, B or b until the picture and sound quality are optimal, then press The + or ­ icon on the menu flashes while tuning. [. . . ]