User manual SONY KV-XR34M80

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. Dangerously high voltages are present inside the TV. Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. ⷠTo avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. [. . . ] ⷠThe MENU, t and 2 +/­ buttons on the TV front panel can also be used for the operations above (see page 8). The "Picture" menu allows you to adjust the picture settings. Make sure the "Picture" icon ( selected, then press . Press V or v to select "On", then press To cancel, select "Off", then press . * You can adjust the setting to your personal preference in the "Picture Adjustment" , "Color Temperature" and "VM" options only when the "Personal" mode is selected. Press V or v to select either "Picture" (contrast), "Brightness", "Color", "Hue" (color tones) or "Sharpness", then press . Selecting "Reset" will set your TV to the factory setting. Press V, v, B or b to adjust the setting of your selected item, then press Repeat the above steps to adjust other items. The adjusted settings will be received when you select "Personal". Reducing "Sharpness" can also reduce picture noise. The "Sound" menu allows you to adjust the sound settings. * You can adjust the setting to your personal preference in the "Sound Adjustment" option only when the "Personal" mode is selected (see page 17). The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of "Personal" mode in the menu. Make sure that "Adjust" is selected, then press . Selecting "Reset" will set your TV to the factory setting. Press B or b to select the desired sound frequency, then press V or v to adjust the setting and press . The adjusted settings will be received when you select "Personal". Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. ⷠYou may display the settings directly using the SOUND MODE button on the TV front panel (see page 8) or button on the remote control (see page 10). The "Timer" menu allows you to set TV to turn off and turn on automatically. [. . . ] If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 20). If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals. ⷠSome DVD player terminals may be labeled differently: Connect Y (green) CB (blue) CR (red) To (on the DVD player) Y CB, PB, Cb or B-Y CR, PR, Cr or R-Y If you select "DVD" on your TV screen, the signal from the T (monitor output) jacks will not be output properly. [. . . ]