User manual SONY KV-10FMR20

[. . . ] Position the unit so that there is a clear space of 10 cm from a wall, allowing you to press the U (MAIN POWER) switch to turn it on and off completely. Television programmes, films, video tapes and other materials may be copyrighted. This video TV is designed to receive TV programmes based on PAL (B/G) colour system and to record and play on PAL colour system. Do not expose the unit to rain or moisture. [. . . ] When watching a movie With each press the vertical bars increase or decrease and the figure at the right margin changes to show the control level. To go back to the normal TV picture, press . Plug the headphones (not supplied) to the 2 (headphones) jack inside the front panel on the video TV. This section shows you how to insert a cassette and to play it. More convenient functions you can use while playing a tape is shown in "Additional Operations" from page 31. 3 Gently press the centre of the front side of a cassette with the arrow The video TV turns on automatically when it is in standby mode. If you insert a cassette with its safety tab removed, playback starts. You can eject the cassette even if the power is off. The cassette is provided with a safety tab to protect against accidentally erasing a previous recording. Break off the safety tab with a screw driver or a similar tool. If the safety tab is removed, the cassette is ejected when you try to record on it. Recording resumes from the point set in step 1. When the recording pause mode lasts for about 5 minutes, the video TV stops recording to protect the quality of video tapes. The TV screen is turned off and the u lamp lights up. The Timer Recording function allows you to preset your video TV to record up to six programmes within a one-month period. Make sure that the time and date clock are set. Make sure that the loaded cassette has its safety tab. If a cassette without safety tab is loaded, the message "Tape with safety tab is required for recording" is displayed. Example: Here is how to record a programme broadcast on programme position 26 from 20:15 to 21:55 on Friday, 6th December 1996. 4 Press OK, then set the hour of the recording start time to "20" with + or Press OK, then set the minute of the recording start time to "15" with + or ­ . Press OK, then set the hour of the recording stop time to "21" with + or ­ . Press OK, then set the minute of the recording stop time to "55" with + or ­ . [. . . ] (Do not use a commercially available wet-type cleaning tape, as it may damage the video heads. / Cover the tab hole with adhesive tape, or use another cassette when you press REC with a safety tab. / Insert a cassette with the safety tab. You have made a mistake when setting the timer. [. . . ]