User manual SONY KV-1370R

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. How to replace the fuse Open the fuse compartment with a blade screwdriver, and replace the fuse. · IMPORTANT If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] Press or to select the channel and then, press again the OK button to watch the selected channel. Selecting Screen format Press to view programmes in 16:9 mode. Press again to return to 4:3 mode. K GB PROGR RM 887 S Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to ""Teletext" section of this instruction manual. Overview 5 Overview of TV Buttons Auto Start Up Button Volume control buttons Programme Up or Down Buttons (Select TV channels) Press on the mark on the front of the TV to reveal the front connectors. Selecting Input source Standby indicator On/Off switch Video Input jack Audio Input jack Headphone jack Inserting Batteries into the Remote Control Make sure to insert the supplied batteries using the correct polarities. Always remember you dispose of used batteries in an environmental friendly way. 6 Overview-Installation Connecting an Indoor Aerial (only for KV-1370R) For a better reception we recommend you connect an external aerial. However, where an external aerial is not available and your local VHF/UHF signal is strong you can connect the supplied indoor aerial as follows: 1 Insert the aerial into the opening on top of the set until it clicks. 2 Connect the aerial connector to the aerial socket on the rear of the set. 3 After turning on the TV, adjust the aerial for optimum reception. GB Connecting an Outdoor Aerial and VCR Connecting cables are not supplied or VCR OUT IN For more details of VCR connection, please refer to the section "Connecting Optional Equipment" of this instruction manual. Scart lead is optional. Installation 7 Switching On the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to: 1) choose the language of the menu screen, 2) choose the country in which you wish to operate the TV, 3) search and store all available channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change the language menu, change or repeat the tuning (e. g. when you move house) or rearrange again the order of the channels afterwards, you can do that by selecting the appropriate menu in the (Set Up). For more information, refer to the "Menu Guide" section of this instruction manual. You can also do that by pressing the Auto Start Up Button on the TV set. 1 Connect the TV plug to the mains socket (220-240V AC, 50Hz) Press the on/off button on the TV set to turn on the TV. The first time you press this button, a Language menu displays automatically on the TV screen. 2 Press the or button on the remote control to select the language, then press the OK button to confirm your selection. Then press or to select the TV Broadcast system (B/G for western European countries, L for France, I for United Kingdom or D/K for eastern European countries). continued. . . 12 Menu System Level 1 Picture Adjustment Mode: Personal Contrast Brightness Colour Sharpness Hue Reset OK Level 2 Level 3 / Function 3 After selecting the Channel option, press . Then press or to select the channel tuning ("C" for terrestrial channels or "S" for cable channels). After that, press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store. OK Set Up Language/Country Auto Tuning Programme Sorting Manual Programme Preset Advanced Features OK Set Up Language/Country Auto Tuning Programme Sorting Manual Programme Preset Advanced Features Repeat all the above steps to tune and store more channels. Manual Programme Preset Programme: System: Channel: Label: AFT: Skip: Decoder: Confirm 01 B/G C 21 --TVE On No Off OK b)Normally the automatic fine tuning (AFT) is operating, however you can manually fine tune the TV to obtain a better picture reception in the case that the picture is distorted. To do that: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. Finally press OK twice to store. GB c) Skip any unwanted programme numbers when they are selected with the PROGR +/buttons. To do that: Highlighting the Programme option, press the PROGR +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press . Finally press OK twice to confirm and store. [. . . ] To watch the picture of the connected equipment, press the correct input symbol appears on the screen. Symbol 1 Input Signals · Audio / video input signal through the Scart connector C · RGB input signal through the Scart connector C. This symbol appears only if a RGB source has been connected. 2 · Video input signal through the phono socket A and Audio input signal through B. [. . . ]