User manual SONY KV-13M20

[. . . ] If you are unable to insert the plug fully into the outlet, contact your dealer. If any liquid or solid object falls into the TV, unplug it and have it checked by qualified personnel before operating it further. CAUTION When using TV games, computers, and similar products with your TV, keep the brightness and contrast functions at low settings. If a fixed (non-moving) pattern is left on the screen for long periods of time at a high brightness or contrast setting, the image can be permanently imprinted onto the screen. Continuously watching the same channel can cause the imprint of station logos onto the TV screen. [. . . ] S VIDEO does not provide sound; the audio cables must still be connected. 7 Operating Instructions TV and Satellite Receiver From cable/ antenna Rear of TV 2 1 Satellite antenna cable Satellite Receiver Video (yellow) Audio L (white) Audio R (red) 3 1 2 3 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV. Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your satellite receiver to AUDIO and VIDEO IN on your TV. You can use the button to switch between the VHF/UHF and VIDEO inputs. 8 For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable. S VIDEO does not provide sound; the audio cables must still be connected. Connecting Your TV TV, Satellite Receiver, and VCR Satellite antenna cable 4 From cable/ antenna Rear of TV 1 VCR 2 Satellite Receiver 3 5 Video (yellow) Audio L (white) Audio R (red) 1 2 3 4 5 Connect the cable from your satellite antenna to SATELLITE IN on the satellite receiver. Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR. Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF jack on your TV. Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your satellite receiver to AUDIO and VIDEO IN on your VCR. Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your VCR to AUDIO and VIDEO IN on your TV. To view from the satellite receiver or VCR, select the video input to which your satellite receiver or VCR is connected by pressing on the remote control. 9 Operating Instructions Connecting a DVD Player Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your DVD player to AUDIO and VIDEO IN on your TV. Rear of TV Rear of DVD Player Video (yellow) Audio L (white) Audio R (red) Optional connection If your DVD player is equipped with component video outputs (Y, PB, PR), you can optimize the picture quality by using component video cables. 1 2 10 For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable. S VIDEO does not provide sound; the audio cables must still be connected. Rear of TV Rear of DVD Player Y (black and white) PB (blue) PR (red) Audio L (white) Audio R (red) 2 1 Using component video cables (not supplied), connect the Y, PB, PR OUT on your DVD player to Y, PB, PR IN on your TV. : Neutral VM : Low Move Select End Change your audio settings. Audio MTS : Stereo Move Select End Customize your channel settings. Channel Setup Favorite Channels Cable : On Channel Fix : Off Auto Program Channel Skip/Add Channel Label Move Select End Set rating limits on your TV based on a program's rating or content. Parental Control Password : Move Select End The menus shown in this manual are for KV-24FS100. Your menus may not look like those illustrated. 15 Operating Instructions Menu Allows you to Set the clock on your TV and program scheduled viewing using Timer 1 and Timer 2. Timer Timer 1 : Set Timer 2 : Set Current Time Move Select End Setup Caption Vision : Off Video Label Tilt Correction Language : English Demo Move Select End Select closed captioning options, label video inputs, adjust tilt correction, select menu languages, or run a demo of the menus. 16 Using the Menus 2Using the Menus This section shows the options available for setting up and adjusting your TV. To Access a Menu 1 2 3 4 5 Press to display the on-screen menu. Use the G or g buttons to highlight the desired menu, then press Use the F or f buttons to highlight the desired option, then press Press to complete the adjustment or follow the instructions that will appear on your screen to activate the desired option. Press to exit the menu. Press once to display the on-screen menu, and press again to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 90 seconds. 17 Operating Instructions Using the Video To Display MENU Menu To Select Video Picture Controls Color Temp. : Neutral VM : Low Move Select End To access the Video menu, refer to the following steps: Picture Controls Press g to open Picture Controls menu: Picture: Press G to decrease the contrast. Brightness: Press G to darken the picture. Color: Press G to decrease color saturation. Sharpness: Press G to soften the picture. Use the F or f buttons to select from one of the following options: Cool: Gives the white colors a blue tint. Neutral: Gives the white colors a neutral tint. [. . . ] Make sure the batteries have been inserted correctly into the remote control (page 2). Try another channel; it could be station trouble. Adjust Picture in the Picture Controls menu under Video (page 18). Adjust Brightness in the Picture Controls menu under Video (page 18). [. . . ]