User manual SONY KV-13V50

[. . . ] Take care not to place heavy objects on the power lead as this could result in damage. We recommend you wind any excess lead around the holders provided on the rear of the TV. Do not allow children to climb on to it. Do not place the TV on its side or face up. [. . . ] However, where an external aerial is not available and your local VHF/UHF signal is strong you can connect the supplied indoor aerial as follows: 1 Insert the aerial into the opening on top of the set until it clicks. For more details of VCR connection, please refer to the section "Connecting Optional Equipment" of this instruction manual. The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to: 1) choose the language of the menu screen, 2) search and store all available channels (TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change the language menu, change or repeat the tuning (e. When you move house) or rearrange again the order of the channels afterwards, you can do that by selecting the appropriate menu in the (Set Up). For more information, refer to the "Menu Guide" section of this instruction manual. The first time you press this button, a Language menu displays automatically on the TV screen. Or button on the remote control to select the language, then press the OK button to confirm your selection. 4 A new menu appears on the screen asking you to check The TV starts to automatically search and store all available channels (TV Broadcast) for you. Please be patient and do not press any button. Otherwise the automatic tuning will not be completed. To do that: after selecting the option, press and then proceed in the same way as in step 5 b) of the section "Switching On the TV and Automatically Tuning". By one to the programme order of your choice. Press or to select on which programme number you want to preset the channel (for VCR, select programme number "0"). After that, press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. Operating, however you can manually fine tune the TV to obtain a better picture reception in the case that the picture is distorted. To do that: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. C) Skip any unwanted programme numbers When they are selected with the PROGR +/buttons. [. . . ] This symbol appears only if a RGB source has been connected. 2 · Video input signal through the phono socket A and Audio input signal through B. Design and specifications are subject to change without notice. Here are some simple solutions to the problems which may affect the picture and sound. [. . . ]