User manual SONY KV-1925R

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note to the CATV Installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Reorient or relocate the receiving antennas. Increase the separation between the equipment and receiver. [. . . ] See page 7 on how to operate other functions. Press repeatedly to switch to satellite receiver input (VIDEO input). 17 01US01COV-BR2. book Page 18 Wednesday, April 23, 2003 2:44 PM Operating Instructions Connecting a TV, VCR, and Satellite Receiver 4 1 Rear of TV 1 3 4 Y From cable/ antenna 5 AUDIO OUT (VAR/FIX) 2 VCR S VIDEO PB PR VIDEO L (MONO) L (MONO) R R Satellite receiver 3 5 Video (yellow) Audio L (white) Audio R (red) 1 2 3 4 5 Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite receiver. Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR. Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF jack on your TV. Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your VCR. Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. To view from the satellite receiver or VCR, select the video input to which your satellite receiver or VCR is connected by pressing on the remote control. Using your TV with this connection This connection allows you to do the following: Program your Sony remote control to operate your VCR or satellite receiver (see page 5). Turn on your VCR to enable your satellite receiver to work with this connection. To activate your remote, press to operate your VCR or to operate your satellite receiver. Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local channels or unscrambled), or your cable box (cable system or scrambled channels). 18 01US01COV-BR2. book Page 19 Wednesday, April 23, 2003 2:44 PM Connecting Your TV Connecting a DVD Player Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your DVD player to AUDIO/VIDEO IN on your TV. Rear of DVD Player 1 Rear of TV 3 4 Y 5 AUDIO OUT (VAR/FIX) S VIDEO PB PR VIDEO L (MONO) L (MONO) R R Video (yellow) Audio L (white) Audio R (red) Optional connection For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables. If your DVD player is equipped with component video outputs (Y, PB, PR), you can improve the picture quality by using component video cables (480i only). Use the yellow PIP (CH +/-) buttons to change the channel in the PIP window picture. To check your PIP Press the TV button to control PIP with the yellow buttons. Tune your TV to a channel, which you know is currently airing programming. Press to turn PIP on, then press appear in the window picture. The channel from the main window should now Use the (CH +/-) buttons on the bottom of your remote control to select the same channel in the main picture. Use the yellow PIP (CH +/-) buttons to change the channel in the PIP window picture. Press the yellow PIP button to switch the PIP window to the video inputs for other equipment that is connected to any of the VIDEO IN jacks of your TV (connected equipment to VIDEO 4-5 are not visible in PIP). You should see a different picture in your PIP window for each piece of connected video equipment. Make sure the connected equipment is turned on and working when you perform this test. If you're having problems with PIP, refer to "Connections that affect your ability to use PIP" on page 26 or see "Troubleshooting" on page 43 for possible solutions. 24 01US01COV-BR2. book Page 25 Wednesday, April 23, 2003 2:44 PM Using Basic Functions PIP Function buttons Yellow PIP button Description Press to turn the PIP feature on and off. Press repeatedly to change the window size (1/9, 1/16, Off). Press to cycle through the available video equipment you have connected to the TV in the PIP window picture. The connected equipment in VIDEO 4-5 (Y, Pb, Pr) is not visible in PIP. [. . . ] Please have your TV serial number ready. The number is located on the rear of your TV and on the front cover of this manual. Our Customer Information Services Center phone number is 1-800-222-SONY (7669) (US residents only) or (416) 499SONY (7669) (Canadian residents only). 46 01US01COV-BR2. book Page 47 Wednesday, April 23, 2003 2:44 PM Other Information Specifications For all models (except as noted) Television system Channel coverage Antenna Picture tube Power requirements Supplied accessories Inputs/outputs American TV standard/NTSC VHF: 2-13/UHF: 14-69/CATV: 1-125 75-ohm external antenna terminal for VHF/UHF FD Trinitron® tube 120V, 60 Hz Size AA (R6) batteries (2) Remote Control RM-Y181 (1) Inputs 1 video, 1 audio (front) Outputs 2 video, 2 audio (rear) 1 S VIDEO 2 RF 2 Y, PB, PR, 2 audio TV Stand: SU-27F1 for KV-1925R SU-32F1 for KV-32FS210 SU-36F1 for KV-36FS210 1 AUDIO OUT Optional accessories KV-1925R Screen size Speaker output Power consumption Dimensions (W/H/D) Mass Visible screen size: 679 mm (27 inches) measured diagonally Actual screen size: 736. 6 mm (29 inches) measured diagonally 10 W x 2 175 W in use 1 W in standby 784 x 601. 5 x 520 mm (30 7/8 x 23 11/16 x 20 1/2 inches) 46. 8 kg (103 lbs. 8 oz) Visible screen size: 803 mm (32 inches) measured diagonally Actual screen size: 863. 6 mm (34 inches) measured diagonally 10 W x 2 195 W in use 1 W in standby 898 x 682 x 584 mm (35 3/8 x 26 7/8 x 23 inches) 75. 8 kg (167 lbs. ) Visible screen size: 911mm (36 inches) measured diagonally Actual screen size: 965. 2 mm (38 inches) measured diagonally 10 W x 2 195 W in use 1 W in standby 1020 x 760 x 640 mm (40 1/4 x 30 x 25 1/4 inches) 101. 2 Kg (223 lbs) KV-32FS210 Screen size Speaker output Power consumption Dimensions (W/H/D) Mass KV-36FS210 Screen size Speaker output Power consumption Dimensions (W/H/D) Mass Design and specifications are subject to change without notice. 47 01US01COV-BR2. book Page 48 Wednesday, April 23, 2003 2:44 PM 01US01COV-BR2. book Page 49 Wednesday, April 23, 2003 2:44 PM Index 16:9 Enhanced 40 F Favorite Channels 31 Front Panel 2 A Audio Out 30 Auto Program 21, 32 Auto SAP 29 H Hue 28 B Balance 29 Bass 29 Batteries Inserting in remote 2 Replacing 2 Brightness 28 L Language 40 M Menus Audio 29 Basic 41 Channel 31 Parent 33 Setup 40 Timer 39 Video 28 Mode Movie 28 Pro 28 Standard 28 Vivid 28 MTS Auto SAP 29 Mono 29 Stereo 29 C Cable 31 Cable Box Operating 8 Connections 12 Caption Vision 40 Channel Fix 31 Channel Label 32 Channel Skip/Add 32 Color 28 Color Temperature 28 Connections Cable and antenna 11 Cable Box and Cable 13 Connecting a Camcorder 20 Connecting a DVD Player 19 Connecting an Audio System 20 TV and Cable Box 12 TV and Satellite Receiver 17 TV and VCR 14 TV, Satellite Receiver and VCR 18 TV, VCR and Cable Box 15 Current Time 39 P Parental Control 34 Picture 28 Picture in Picture (PIP) 24 R Ratings English Rating 38 French Rating 38 Movie Rating 36 TV Rating 36 U. S. A. [. . . ]