User manual SONY KV-1926RA

[. . . ] If any liquid leaks from the batteries and touches your skin, immediately wash it away with water. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms. For children's safety, do not leave children alone with the TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] X Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the "Personal" option. The last adjusted picture setting from the "Picture Adjustment" option in the menu (see page 15). Press (or SOUND MODE on the front panel) to select the desired sound mode. To listen to dynamic and clear sound that emphasizes both the low and high tones. Sound that emphasizes voice and high tones. The last adjusted sound setting from the "Sound Adjustment" option in the menu (see page 17). The MENU button lets you open a menu and change the settings of your TV. the following is an overview of the menu system. Picture icon Sound icon Timer icon Channel Setup icon Setup icon Menu level 1 Return icon Name of the current menu Menu level 3 Menu level 2 Level 3/Function Select the picture mode: "Dynamic" t "Standard" t "Soft" t "Personal" "Picture Adjustment" Adjust the "Personal" option: "Picture" t "Brightness" t "Color" t "Hue" t "Sharpness" t "Reset" "Color Temperature" Adjust white color tint: "Cool" t "Neutral" t "Warm" "VM" Sharpen the edges of each object: "High" t "Low" t "Off" "Intelligent Picture" Optimize picture quality: "On" t "Off" "Sound" "Mode" Select the sound mode: "Dynamic" t "Drama" t "Soft" t "Personal" 16 "Sound Adjustment" Adjust sound frequency settings of "Personal" option: "Adjust" t "Reset" "Balance" Select to emphasize the left and right speakers. Level 3/Function Set TV to turn off automatically. (or b) to Press confirm your selection and go to the next level. You can also cancel "Sleep Timer" and "Wake Up Timer" by turning off the TV's main power. â· If no buttons or controls are pressed for more than one hour after the TV is turned on using the "Wake Up Timer", the TV automatically goes into standby mode. The "Channel Setup" menu allows you to preset channels automatically, manually preset channels, select the TV system, label the program number and block unwanted programs. Press V or v to select either "B/G", "I", "D/K" or "M", then press . Press V or v to select the program number, then press (2) Select "Label" and press , then press V or v to select alphanumeric characters for the label. Press V or v to select the program number, then press . (2) Select "Block" and press , then press V or v to choose either "On" or "Off". If you preset a blocked program number, that program number will be unblocked automatically. During automatic channel presetting, your TV screen will indicate "B/G", "I", "D/K" or "M" for the "TV System". After selecting "Manual Program", select the program number to which you want to preset a channel. (1) Make sure "Program" is selected, then press . [. . . ] (1) Select "Video Input" and press Press V or v to select the input you want to label, then press . You can enjoy high quality sound by connecting the 3D WOOFER as follows: Connect only the supplied 3D WOOFER; otherwise your TV may malfunction. â· Unplug your TV from the wall outlet when connecting the 3D WOOFER. â· To prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D WOOFER wire strands stick out, making contact with the neighbouring 3D WOOFER terminal. [. . . ]