User manual SONY KV-1970R

[. . . ] If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. How to replace the Fuse Open the fuse compartment with a blade screwdriver, and replace the fuse. [. . . ] Press the b or B buttons to select one of the following modes then press the OK button to store the chosen mode: Normal: all 5 speakers are activated Wide: wider bandwidth for centre speaker Phantom: centre speaker is not used 6. Press the V or v buttons to alter the sound level, then press the OK button. Repeat steps 7 and 8 to select and adjust the `Centre', `Right', and `Surround' speakers, so that the sound output from all speakers are balanced in relation to your sitting position. Using this Screen Mode feature you can change the aspect ratio of the screen. Press the V or v buttons on the remote control to select the symbol on the menu screen then press the b button to enter the `PICTURE CONTROL' menu. Press the v button to select `Format' on the menu screen then press the b button to enter the `FORMAT' menu. Press the b or B button repeatedly to select one of the following modes then press the OK button to store the chosen mode: · Smart - imitation of wide screen effect (16:9) for 4:3 broadcasts wide - for 16:9 broadcasts zoom - imitation of wide screen effect (16:9) for movies broadcast in cinemascopic format 14:9 - compromise between 4:3 and 16:9 format - for conventional 14:9 picture 4:3 - conventional 4:3 picture If you selected zoom mode, 14:9 mode or smart mode in step 4, you can use `Scroll' to move the screen up- or downwards in order to see the cutoff parts (eg to read subtitles). With this feature you can view subtitles on the TV screen when watching digital channels. When watching analogue channels you can view subtitles via the teletext menu (see the teletext section of this instruction manual for details). Press the v button to select the symbol on the menu screen then press the b button to enter the `PRESET' menu. Press the b or B buttons to select the language in which you wish the subtitles to appear. Press the v button to select `Manual Programme Preset' then press the b button to enter the `MANUAL PROGRAMME PRESET' menu. Press the b button repeatedly until the first element of the `LABEL' column is highlighted. Press the V or v buttons to select a letter or number (select `-' for a blank) then press the b button to confirm. Repeat steps 4 to 7 if you wish to label other channels. When viewing analogue channels press a numbered button on the remote control to select the channel which carries the teletext service you wish to receive. Press the button again if you wish to superimpose teletext on to the TV screen. Select your required page using the numbered buttons on the remote control. If you make an error, complete the number, then reenter the correct page number. To move to the next or preceding page Press the or buttons to select the previous or next page. Using colour buttons to access pages (Fastext) When the colour coded menu appears at the bottom of a page, press the colour buttons (red, green, yellow or blue) on the control to access the corresponding page. Displaying TOP-Text (when available) With TOP-Text you can access pages easily by selecting blocks or groups of pages. [. . . ] For mono equipment Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 2 input signal using the instructions on this page. Finally, refer to the `Adjusting the sound' section of this manual and select `A' on the sound menu screen. Press the v button to select the symbol on the menu screen then press the b button to enter the `VIDEO CONNECTION' menu screen. Tuning information such as the channel overview are downloaded from the TV set to the VCR. [. . . ]