User manual SONY KV-1972R

[. . . ] ⷠSymbols used in this manual: · Shaded buttons on the remote control show you the buttons you have to press to follow the sequence of the instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. However, some TVs may have features which require they are left in standby. [. . . ] This menu also allows you to customise the picture mode based on the programme you are watching: v Personal (for individual settings). Select Reset and press the OK button to return the picture settings to their factory preset levels. The "Sound Adjustment" menu allows you to alter the sound adjustments. To do this: after selecting the item you want to alter press b, then press repeatedly v/V/B or b to adjust it and finally press OK to store the new adjustments. This menu also contains two submenus as following: Mode b v Personal (for individual settings) Rock Pop Jazz v Dolby* Virtual: v Off: Normal. v On: Simulates the sound effect of Dolby Pro Logic surround. V Off: Volume level changes according to the broadcast signal. V On: Volume level of the channels will stay the same, independent of the broadcast signal (e. Select Reset and press OK to reset the sound to the factory preset levels. ⷠIn case of a bilingual broadcast select Dual Sound and set A for sound channel 1, B for sound channel 2 or Mono for mono channel if available. For a stereo broadcast you can choose Stereo or Mono. Select the other four characters in the same way and finally press OK to store. The "Manual Programme Preset" option in the "Set Up" menu allows you to: a) Preset channels or the VCR channel one by one to the programme order of your choice. to do this: 1 After selecting the "Manual Programme Preset" option , press b then with Programme option highlighted press b. Press v or V to select on which programme number you want to preset the channel (for VCR, select programme number "0"). The following option is only available depending on the country you have selected in the "Language / Country" menu. After that, press the number buttons to enter directly the channel number of the TV broadcast or the channel of the VCR signal. If you do not know the channel number, press v or V to search for it. When you tune the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. B) Label a channel using up to five characters. To do this: Highlighting the Programme option, press the PROG +/- button to select the programme number with the channel you wish to name. [. . . ] enter the "Detail Set Up" option and set "TV Speakers" to "Off". Audio level of the external speakers can be modified by pressing the volume buttons on the remote control. Also treble and bass settings can be modified through the "Sound Adjustment" menu. To enjoy "Dolby Virtual" sound effect through your Hi-Fi equipment: Place the speakers of your equipment in front of your listening position and beside the TV set but keeping a distance of 50 cm between each speaker and the TV set. [. . . ]