User manual SONY KV-20M42

[. . . ] 4-081-454-21 Trinitron Color TV Operating Instructions ® KV-13M42 KV-20M42 KV-20S90 © 2001 by Sony Corporation User Guide WARNING To reduce the risk of fire or electric shock, do not expose the TV to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note to the CATV Installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. SAFETY PRECAUTIONS Operate the TV only on 120 V AC. One blade of the power plug is wider than the other for safety purposes and will fit into the power outlet only one way. [. . . ] Press again to exit the menu at any time. Activates highlighted selections in the on-screen menu. TV The remote control shown (RM-Y155) is for KV-20S90. For KV-13M42 and KV-20M42 models, your remote control does not have the MTS button. 9 Operating Instructions Moves the cursor in the on-screen menu. Press to restore factory settings while in the on-screen menu. Press when you want to adjust the volume. If you lost your remote control, see page 26 10 Using the Remote Control and Basic Functions Setting Up the TV Automatically After you have finished connecting your TV, you will want to run AUTO PROGRAM to set up your channels, (KV-13M42, see page 17 for information on AUTO PROGRAM). For models KV-20M42, KV-20S90 only 1 Press to turn on the TV, the Initial setup screen appears. models only) (Canadian models only) 2 3 Make your language selection, the on-screen menus will change to reflect your choice. Follow the on-screen instructions to continue AUTO SET UP or for a DEMO of the menus. For U. S. models only 4 Press to operate the on-screen menus without the remote control. Follow the on-screen instructions to make adjustments to your TV settings. To perform Auto Setup again Press the steps 2-4. and buttons on the front panel of the TV and follow To reset your TV to factory settings, turn the TV on. Then, while pressing the button on the remote control, press POWER on the TV. The TV will turn itself off, then back on, the original settings will be restored. 11 Operating Instructions Quick Start to the Menus The following settings are available in your on-screen menus: Menu Allows you to Make adjustments to your picture settings. Choose from available audio features, such as MultiChannel Sound, (KV-20S90 only). Set the clock on your TV (CURRENT TIME SET) and program scheduled viewing (ON/OFF TIMER) (Except KV-13M42). Program your channels, set TV rating, or select menu language. The CHANNEL SET UP menu is a sub-menu that provides further options for setting up your channels. 12 The menus shown are for KV-20S90. Your menus may not look like those illustrated. Using the Menus Using the Menus This chapter shows the options available for setting up and adjusting your TV. To access a menu 1 2 3 Press Press . to access the menu. Use the F or f buttons to highlight a menu. Using the VIDEO menu Item PICTURE BRIGHTNESS COLOR HUE SHARPNESS Press f to Decrease picture contrast Darken the picture Decrease color intensity Increase the red tones Soften the picture Press F to Increase picture contrast Brighten the picture Increase color saturation Increase the green tones Sharpen the picture 13 Operating Instructions Using the AUDIO KV-20S90 only menu MTS Multi-Channel TV Sound STEREO: Select when viewing a broadcast in stereo. SAP: Listen to bilingual or other Second Audio Programs (SAP). MONO: Select to reduce noise in areas with poor reception. If your TV is set to SAP, all non-SAP programs will be muted. If your TV does not have sound, check your AUDIO settings. For direct MTS settings, press the button on your remote control. 14 Using the Menus Using the TIMER Except KV-13M42 menu DAYLIGHT SAVING CURRENT TIME SET YES: Select in spring to compensate for Daylight Savings. NO: Select in fall at the end of Daylight Savings. 2 Press F or f to cycle through the days, then press . 3 Press F or f until the current hour is displayed, then press . [. . . ] Make sure the batteries have been inserted correctly into the remote control. Try another channel, it could be station trouble. Adjust PICTURE in the VIDEO menu (page 13). Adjust BRIGHTNESS in the VIDEO menu (page 13). [. . . ]