User manual SONY KV-20TS20

[. . . ] Do not install the TV where it may be exposed to mechanical vibrations. Place the TV set only on a stable stand designed for the weight and dimensions of the TV. Do not operate the TV set on anything other than a 220-240V AC, 50Hz supply. Do not operate the TV if any liquid or solid objects fall in through the ventilation slots. [. . . ] If other values are set, the complete combination will be scrolled. You may wish to record the selected programme with your VCR. This information is transferred to the VCR connected to your set. With this setting on, you have the guaranteed recording of the whole broadcast should there be a change in the TV programme. This only works if the selected channel broadcasts a VPS/PDC signal. With longplay you can record twice as much on a videotape. The picture quality, however, may suffer. Select which of the connected Smartlink VCRs you wish to programme. The index page of the teletext service (usually page 100) gives you information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext errors. Select the TV channel which carries the teletext service you want to view. Adjusting the picture and sound The picture and sound are preset at the factory. You can however adjust them to suit your own taste. Press the v or V buttons to select for picture settings or for sound settings then press B to enter either the `Picture Adjustment' menu or the `Audio Adjustment' menu. Press the v or V buttons to select the item on the screen you wish to adjust then press B to confirm. As soon as you have adjusted the item, press the OK button to store the new setting. Repeat steps 3-5 if you wish to adjust any of the other items. US video tapes) Reset AI (Artificial Intelligence) Resets picture to the factory preset levels Reduces picture noise in case of a weak broadcasting signal. Finally, press the OK button to store the new adjustment. If you want to store the new setting, you need to set the Equaliser mode to `Personal'. Personal mode permanently stores the setting, all other modes (Vocal, Jazz, Rock, Pop) store only until the next mode change. Balance b B V v V v V v More left More right Off: On: Off: On: Off: On: Normal For music broadcasts Normal Special acoustic effect Volume level changes according to the broadcast signal. [. . . ] Using the buttons underneath the cover of the remote control you can control other Sony equipment. Set the selector VTR 1234 DVD according to the equipment you want to control: VTR1 Beta VCR VTR2 8mm VCR VTR3 VHS VCR VTR4 Digital Video (DCR-VX 1000/9000E, VHR-1000) DVD Digital Video Disk 3. use the buttons on the remote control to operate the equipment. * * If your equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on the TV remote control. [. . . ]