User manual SONY KV-2145R

[. . . ] Shaded buttons on the remote control show you the buttons you have to press to follow the sequence of the instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. However, some TVs may have features which require they are left in standby. [. . . ] Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: The "Picture Adjustment" menu allows you to alter the picture adjustments. To do this: After selecting the item you want to alter press the b button, then repeatedly press the v/V/B or b buttons to make any adjustments and finally press the OK button to store. This menu also allows you to customise the picture mode based on the programme you are watching: v Personal (for individual settings). Select Reset and press the OK button to return the picture settings to their factory preset levels. Level 1 Level 2 Level 3 / Function SOUND ADJUSTMENT The "Sound Adjustment" menu allows you to alter the sound settings. To do this: After selecting the item you want to alter press the b button, then repeatedly press the v/V/B or b buttons to make any adjustments and finally press the OK button to store. Enhances clarity, detail and presence of sound by using the "BBE High Definition Sound system"*. V Dynamic: "BBE High Definition Sound system"* intensifies clarity and presence of sound for better intelligibility and musical realism. Resets the sound to the factory preset levels. V Off: volume level changes according to the broadcast signal. Then with the first element highlighted, press the v or V buttons to select a letter, number or "-" for a blank, then press b button to confirm the character. to do this: 1 After selecting the "Manual Programme Preset" option , press the b button then with Programme option highlighted press the b button. Press the v or V buttons to select which programme number you want to preset the channel to (for VCR, select programme number "0"). 2 The availability of this option depends on the country you have selected in the "Language/Country" menu. After that, press the numbered buttons to directly enter the channel number of the TV Broadcast or the VCR channel. If you do not know the channel number, press the v or V buttons to search for it. When you have tuned to the desired channel, press the OK button twice to store. Repeat all the above steps to tune and store more channels. B) Label a channel using up to five characters. To do this: After highlighting the Programme option, press the PROG +/- button to select the programme number of the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press b button. [. . . ] Also, treble and bass settings can be modified through the "Sound Adjustment" menu. To enjoy "Dolby Virtual" sound effect through your Hi-Fi equipment: Place the speakers of your equipment in front of your sitting position and besides the TV set, but keeping a distance of 50 cm from each speaker to the TV set. Then, using the menu system, select the menu "Sound Adjustment", and select "Dolby Virtual" on the "Effect" option. To watch the picture from the connected equipment, press the input symbol appears on the screen. [. . . ]