User manual SONY KV-21VX1P

[. . . ] Buttons shaded white on the remote control show you the buttons you have to press to follow the sequence of the instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. However, some TVs may have features which require they are left in standby. [. . . ] To do this: After selecting the option, press OK and then proceed in the same way as in step 3 of the section "Switching On the TV and Automatically Tuning" on page 8. AUTO TUNING This option allows you to automatically search for and store all available TV channels. To do this: After selecting the option, press OK and then proceed in the same way as in the steps 6 and 7 of the section "Switching On the TV and Automatically Tuning" on page 9. PROGRAMME SORTING This option allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do this: After selecting the option, press OK and then proceed in the same way as in the step 8 of the section "Switching On the TV and Automatically Tuning" on page 9. PROGRAMME LABELS This option allows you to name a channel using up to five characters (letters or numbers). To do this: 1 Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting the option, press OK, then press v or V to select the programme number with the channel you wish to name. With the first element of the Label column highlighted, press OK and v, V, B or b to select the letter, next press OK. When you have finished, press v, V, B or b to select the word "End" on the screen and finally press OK to turn off the menu from the screen. To correct the letter, select "%" on the screen to go back and press OK. AV PRESET This option allows you to: a) Designate a name to the external equipment you have connected to the input sockets of the TV set. When you have finished, press v, V, B or b to select the word "End" on the screen and finally press OK to turn off the menu from the screen. To correct the letter, select "%" on the screen to go back and press OK. However you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted. To do this: While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the "Set Up" menu as it is explained on page 16 and after selecting the "Manual Programme" option, press OK. then select the AFT option and press b. Next press v or V to adjust the fine tuning between -15 and +15. D) Skip any unwanted programme numbers when they are selected with the PROG +/- buttons. To do this: Once you have entered the "Set Up" menu as it is explained on page 16 and after selecting the "Manual Programme Preset" option, press OK. Next with the Programme option highlighted, press the PROG +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press b. Finally press OK twice to confirm and store. [. . . ] Design and specifications are subject to change without notice. This instruction manual is made from 100% recycled paper. Here are some simple solutions to problems which may affect the picture and sound. Poor or no picture (screen is dark), but · Using the menu system, select the "Picture Adjustment" menu and select good sound. [. . . ]