User manual SONY KV-25R2D

[. . . ] For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Never push objects of any kind into the set as this could result in a fire or electric shock. Never spill liquid of any kind on the set. If any liquid or solid object does fall through, do not operate the TV. [. . . ] Video input signal through the phono socket C and Audio input signal through B. â· S Video Input signal through the front S Video input jack A and Audio signal through B. For Mono Equipment Connect the phono plug to the MONO (L/G/S/I) socket on the front of the TV and select 3 or S 3 input signal using the instructions above. Finally, refer to the "Sound Adjustment" section of this manual and select "Dual Sound" "A" on the sound menu screen. For more information on Smartlink, please refer to the Instruction Manual of your VCR). Design and specifications are subject to change without notice. Here are some simple solutions to the problems which may affect the picture and sound. Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to the factory settings. â· Check that the optional equipment is on and press the button repeatedly on the remote control until the correct input symbol is displayed on the screen. Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to factory settings. Using the menu system, enter to the "Language/ Country" menu and select the country in which you operate the TV set. To prevent fire, keep inflammable Never place objects or naked lights (eg the TV in hot, humid or candles) away from the TV. Do not install the TV where it may be exposed to mechanical vibrations. Clean the TV with a soft, lightly dampened cloth. Do not use benzine, thinner or any other chemicals to clean the TV. As a safety precaution, unplug the TV before cleaning it. Take care not to place heavy objects on the power lead as this could result in damage. We recommend you wind any excess lead around the holders provided on the rear of the TV. Do not allow children to climb on to it. Do not place the TV on its side or face up. Unplug the power lead before moving the TV. avoid uneven surfaces , quick steps or excessive force. [. . . ] Then press or to correct any slant of the picture between -5 and +5 and finally press OK to store. The index page of the teletext service (usually page 100) gives you information on how to use the service. to operate teletext , use the remote control buttons as indicated below. Make sure to use a channel (TV Broadcast) with a strong signal, otherwise teletext errors may occur. [. . . ]