User manual SONY KV-25VXR

[. . . ] For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Never push objects of any kind into the set as this could result in a fire or electric shock. Never spill liquid of any kind on the set. If any liquid or solid object does fall through, do not operate the TV. [. . . ] Then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. Enhances clarity, detail and presence of sound by using "BBE High Definition Sound system"*. Dynamic: "BBE High Definition Sound system"* intensifies clarity and presence of sound for better intelligibility and musical realism. Resets the sound to the factory preset levels. Off: volume level changes according to the broadcast signal. On: volume level of the channels will stay the same, independent of the broadcast signal (e. If you are listening to the TV through headphones, the "Effect" option will automatically be switched to "Off". **This TV has been designed to create the "Dolby Surround" sound effect by simulating the sound Of four speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded. The sound effect can also be improved by connecting a suitable external amplifier (for details refer to "Connecting to external audio Equipment" on page 19). SLEEP TIMER The "Sleep Timer" option in the "Timer" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: after selecting the option press , then press or to set the time period delay (max. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. B) Label a channel using up to five characters. To do this: Highlighting the Programme option, press the PROG +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next press or to select a letter, number or "-" for a blank. After selecting all the characters, press OK twice to store. Operating, however you can manually fine tune the TV to obtain a better picture reception in the case that the picture is distorted. To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. [. . . ] Whilst the green light is flashing, enter all three digits of the code for your brand using the number buttons on the remote control. If your selected code is entered correctly, all three green lights will be lit momentarily. Turn on your brand VCR or DVD and check that the main functions work. â· If your device is not working or some of the functions do not work please check you entered the correct code set or try the next code listed against the brand. [. . . ]