User manual SONY KV-2670R

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. How to replace the Fuse Open the fuse compartment with a blade screwdriver, and replace the fuse. ⷠIMPORTANT If the plug supplied is not suitable for the socket outlet in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. [. . . ] Press the DOWN arrow key on the remote control to select the symbol on the menu screen then press the RIGHT arrow key to enter the `PRESET'' menu. Press the UP or DOWN arrow key to select `Auto Programme' then press the RIGHT arrow key to display the autotune menu. Press the UP or DOWN arrow keys to select `YES' then press the OK button to confirm. A new menu appears asking you to check that the antenna is connected. ensure the antenna is connected then press the OK button to confirm. The TV now starts to automatically search and store all available channels for you. Please be patient and do not press any buttons once this search and store operation has started. When the automatic tuning procedure is complete, the menu disappears from the TV screen. After tuning the TV, you can use this feature to change the channel order. Press the DOWN arrow key on the remote control to select the symbol on the menu screen then press the RIGHT arrow key to enter the `PRESET' menu. Press the DOWN arrow key to select `Programme Sorting' then press the RIGHT arrow key to enter the `PROGRAMME SORTING' menu. Press the UP or DOWN arrow key on the remote control to select the symbol on the menu screen then press the RIGHT arrow key to enter the `PICTURE CONTROL' menu. Press the DOWN arrow key to select `Format' on the menu screen then press the RIGHT arrow key to enter the `FORMAT' menu. Format Press the UP or DOWN arrow key to select `Format' then press the RIGHT arrow key to enter. Press the LEFT or RIGHT arrow key repeatedly to select one of the following modes then press the OK button to store the chosen mode: · Smart - imitation of wide screen effect (16:9) for 4:3 broadcasts wide - for 16:9 broadcasts zoom - imitation of wide screen effect (16:9) for movies broadcast in cinemascopic format 14:9 - compromise between 4:3 and 16:9 format - for conventional 14:9 picture 4:3 - conventional 4:3 picture If you selected zoom mode, 14:9 mode or smart mode in step 4, you can use `Scroll' to move the screen up- or downwards in order to see the cut-off parts (eg to read subtitles). Press the RIGHT arrow key to highlight the options then press the LEFT and RIGHT arrow keys to adjust the screen position over a range of -5 to +5. Auto 16:9 Press the DOWN arrow key to select `Auto 16:9' then press the RIGHT arrow key to enter. Press the LEFT or RIGHT arrow key to select `On' if you wish the TV set to switch automatically to wide format if a 16:9 broadcast is detected or `Off' for normal mode. With this feature you can a) manually fine-tune the TV to obtain a better picture reception if the picture is distorted or b) preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way a connected VCR records the unscrambled signal. Press the DOWN arrow key to select the symbol on the menu screen then press the RIGHT arrow key to enter the `PRESET' menu. Press the DOWN arrow key to select `Further Programme Preset' then press the RIGHT arrow key to enter the `FURTHER PROGRAMME PRESET' menu. [. . . ] Note: To avoid picture distortion, do not connect equipment to the same time. Connecting a VCR We recommend you connect your VCR to the G socket using a scart lead. If you do not have a scart lead, use the `Manually Tuning the TV' section of this instruction manual to tune in the VCR signal to TV programme number'0'. Connecting to external audio equipment Plug in your hi-fi equipment to the E sockets on the rear of the TV if you wish to amplify the audio output from the TV. [. . . ]