User manual SONY KV-2690R

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service centre. How to replace the Fuse Open the fuse compartment with a flat blade screwdriver, and replace the fuse. FUSE IMPORTANT If the plug supplied is not suitable for the socket outlet in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. Do not connect either wire to the earth terminal in the plug which is marked by the letter E or by the safety earth symbol I or coloured green or green and yellow. WARNING · · · To prevent shock hazard, do not insert the plug cut off from the mains lead into a socket outlet. [. . . ] 01 B/G C21 6 The TV starts to automatically search and store all available broadcast channels for you. Please be patient and do not press any buttons, otherwise the automatic tuning will not be completed. If no channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 7) and press OK. The auto tuning process will start again. No channel found Please connect aerial Confirm OK Programme Sorting Programme: 01 TVE 02 TVE2 03 TV3 04 C33 05 C27 06 C58 Select channel: Exit: MENU OK 7 After all available channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. GB a) If you wish to keep the broadcast channels in the tuned order, go to step 8. b) If you wish to store the channels in a different order: Programme Sorting Programme: 01 TVE 02 TVE2 03 TV3 04 C33 05 C27 06 C58 05 C27 OK Select new position: Exit: MENU i) Press the or button to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press the button. ii) Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press . iii) Repeat steps b)1 and b)2 if you wish to change the order of the other channels. 8 Press the MENU button to remove the menu display from the TV screen. Your TV is now ready for use. First Time Operation 9 Introducing and Using the Menu System Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the remote control to operate the menu system: 1 Press the MENU button to switch the first level menu on. 2 · To highlight the desired menu or option, press · To enter to the selected menu or option, press . · To return to the last menu or option, press . · To alter settings of your selected option, press / · To confirm and store your selection, press OK. or . / or . 3 Press the MENU button to remove the menu from the screen. Menu Guide Picture Adjustment Mode: Personal Contrast Brightness Colour Sharpness Hue Reset OK Picture Adjustment Mode: Personal Contrast Brightness Colour Sharpness Hue Reset OK PICTURE ADJUSTMENT The "Picture Adjustment" menu allows you to alter the picture settings. To do this: after selecting the item you want to alter press adjust it and finally press OK to store the new adjustment. Then press or to select the channel tuning ("C" for terrestrial channels or "S" for cable channels). After that, press the number buttons to enter directly the channel number of the TV broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When you have tuned the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. 2) Label a channel using up to five characters. To do this: Highlighting the Programme option, then press the PROGR +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next press or to select a letter, number or "-" for a blank. Select the other four characters in the same way. After selecting all the characters, press OK twice to store. [. . . ] 45. 8 Kg Accessories supplied: 1 remote control (RM-947) 2 x IEC designated AA size batteries Other features: · Teletext, Fastext, TOPtext. · SmartLink (direct link between your TV set and a compatible VCR. For more information on SmartLink, please refer to your VCR instruction manual). · TV system autodetection. 1/ 21-pin scart connector (CENELEC standard) including audio/video input, RGB input, TV audio/video output. 2/ S (SMARTLINK) 21-pin scart connector (CENELEC standard) including audio/video input, S video input, selectable audio/video output and SmartLink interface. Front Terminals 3 video input ­ phono jack 3 audio input ­ phono jacks headphones jack Design and specifications are subject to change without notice. 20 Additional Information Troubleshooting Here are some simple solutions to the problems which may affect the picture and sound. [. . . ]