User manual SONY KV-2775R

[. . . ] For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Never push objects of any kind into the set as this could result in a fire or electric shock. Never spill liquid of any kind on the set. If any liquid or solid object does fall through, do not operate the TV. [. . . ] If no channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. After all available channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. If you wish to keep the broadcast channels in the tuned order, go to step 8. If you wish to store the channels in a different order: 1 Press the or button to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press the button. 2 Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press . 3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels. Your TV is now ready for use Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: PICTURE ADJUSTMENT The "Picture Adjustment" menu allows you to alter the picture adjustments. To do this: after selecting the item you want to alter press , then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. This menu also allows you to customise the picture mode based on the programme you are watching: Personal (for individual settings). Select Reset and press OK to reset the picture to the factory preset levels. With the first element of the Label column highlighted, press or to select a letter or number (select "-" for a blank), then press to confirm this character. AV PRESET The "AV Preset" option in the "Set Up" menu allows you to designate a name to the external equipment you have connected to the sockets of this TV. To do this: 1 After selecting the option, press , then press or to select the input source you wish to name (AV1 and AV2 are for the rear Scarts and AV3 for front connectors). 2 In the label column automatically appears a label: a) If you want to use one of the 6 predefined labels (CABLE, GAME, CAM, DVD, VIDEO or SAT), press or to select the desired label and finally press OK to store. B) If you want to set a different label, select Edit and press . Then with the first element highlighted, press or to select a letter, number or "-" for a blank, then press to confirm this character. Select the other four characters in the same way and finally press OK to store. By one to the programme order of your choice. Press or to select on which programme number you want to preset the channel (for VCR, select programme number "0"). 2 The following option is only available depending on the country you have selected in the "Language/Country" menu. After that, press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. [. . . ] Then press or to correct any slant of the picture between -5 and +5 and finally press OK to store. The index page of the teletext service (usually page 100) gives you information on how to use the service. to operate teletext , use the remote control buttons as indicated below. Make sure to use a channel (TV Broadcast) with a strong signal, otherwise teletext errors may occur. [. . . ]