User manual SONY KV-27FX10

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service centre. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] For more details of VCR connection, please refer to the section "Connecting Optional Equipment" of this instruction manual. The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) adjust the picture slant 3) search and store all available broadcast channels and 4) change the order in which the broadcast channels appear on the screen. However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the (Set Up menu) or by pressing the Auto Start Up Button on the TV set. 50Hz) The first time that TV set is connected, it is usually turned on. If the TV is off, press the on/off button on the TV set to turn on the TV. The first time you switch on the TV, a Language menu displays automatically on the TV screen. Or button on the remote control to select the language, then press the OK button to confirm your selection. The Picture Rotation menu allows you to correct the picture slants if it is necessary. If picture slants, please adjust picture rotation Not necessary Adjust now If it is not necessary, press necessary and press OK. Or to select Adjust now, then press OK and correct any slant of the picture between ­5 and +5 by pressing or . 5The TV starts to automatically search and store all available broadcast channels for you. To do this: after selecting the option press , then press or to set the time period delay (max. While watching the TV, you can press the button on the remote control to display the time remaining. ⷠOne minute before the TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically. LANGUAGE The "Language" option in the "Set Up" menu allows you to select the language that the menus are displayed in. To do this: after selecting the option, press and then proceed in the same way as in the step 2 of the section "Switching On the TV and Automatically Tuning". AUTO TUNING The "Auto Tuning" option in the "Set Up" menu allows you to automatically search for and store all available TV broadcast channels. To do this: after selecting the option, press and then proceed in the same way as in TV steps 4 and 5 of the section "Switching On the TV and Automatically Tuning". PROGRAMME SORTING The "Programme Sorting" option in the "Set Up" menu allows you to change the order in which the broadcast channels appear on the screen. To do this: after selecting the option, press and then proceed in the same way as in step 6 b) of the section "Switching On the TV and Automatically Tuning". PROGRAMME LABELS The "Programme Labels" option in the "Set Up" menu allows you to name a broadcast channel using up to five characters (letters or numbers). To do this: 1 After selecting the option, press , then press or to select the programme number with the broadcast channel you wish to name. [. . . ] AV2 OUTPUT The "AV2 Output" option in the "Detail Set Up" menu allows you to select the source to be output from the Scart connector :2/q in order you can record from this Scart any signal coming from the TV or from external equipment connected to the Scart connector :1/ or front connectors 3 and 3. If your VCR supports Smartlink, this procedure is not necessary. If you select "AUTO", the output signal will always be the same one that is displayed on the screen. If you have connected a decoder to the Scart :2/q or to a VCR connected to this Scart, please remember to change back the "AV2 Output" to "AUTO" or "TV" for correct unscrambling. [. . . ]