User manual SONY KV-27TS30

[. . . ] If any liquid or solid object does fall through, do not operate the TV. Do not open the cabinet and the rear cover of the TV. For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] The "Language" option in the "Set Up" menu allows you to select the language that the menus are displayed in. To do that: by using the menu system and after selecting the option, press and then proceed in the same way as in the section "Switching On the TV and Automatically Tuning" (see page 6, step 2). The "Parental Lock" option in the "Set Up" menu allows you to lock the buttons of the Video TV set. In this way, after this option is selected and the Video TV set is switched off, the buttons on the Video TV no longer operate. use the remote control to operate the Video TV. To do that: by using the menu system and after selecting the option, press . To cancel this function afterwards, select "Off" instead of "On" in the step above. ⷠIf you have locked your Video TV and the remote commander is lost, press the button (during more than 5 seconds) on the set to operate it. Because of the earth's magnetism, the picture may be slant. In this case, you can correct the pictures slant by using the option "Picture Rotation" in the "Set Up" menu. To do that: by using the menu system and after selecting the option, press . B) If you have selected CHANGE, you can change all the settings by following steps from 2 to 5 of the above section "Recording TV Programmes using DIAL TIMER". This function allows you to preset your Video TV to record up to 5 programmes within a one-month period. Make sure that the loaded cassette has its safety tab intact. 4 Proceed in the same way as in step 3 to set recording start time, recording stop time, Programme number, tape speed (SP or LP) and VPS/PDC "On" or "Off". If you have made a mistake during timer setting, press to return to the previous position and correct the setting. ⷠDate: Daily/Weekly Recording You can preset your Video TV to record the same programme every day of the week (daily recording) or the same programme on the same day every week (weekly recording). Whilst you are in DATE position, with each press of , the setting changes as follows: 23 SAT (today) --> MON-SUN --> MON-SAT --> MON-FRI --> SAT (means every Saturday. L2 is used for the equipment connected to the front connectors . In "LP" mode you can record twice as much as you can in "SP" mode · vPS/PDC: · For details refer to "Timer recording with VPS/PDC signals" section of this instruction manual (see page 14). 6 If you want to set more programmes, press then press OK. The TIMER REC indicator on the Video TV lights up and the Video TV enters into timer recording standby mode. [. . . ] If you have any problems while viewing your Video TV, please check the following troubleshooting guide. Poor or no picture (screen is dark), but good sound. Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to the factory settings. ⷠCheck that the optional equipment is on and press the button repeatedly on the remote control until the correct input symbol is displayed on the screen. [. . . ]