User manual SONY KV-32XBR90S

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service centre. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 13 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] This service is available about 30 minutes after you automatically tune the TV. You can however change this selection if you wish. When you change the TV channel the EPG from the new channel is automatically loaded (if an EPG service is available). In some cases you may also need to press the B button to display the Sony electronic programme guide. Press the V, v, and b buttons to move the cursor around the screen. press the OK button to confirm a selection. A) If you press the OK button in date, time or icon (themes) columns the programme list changes according to the selection. b) If you press the OK button in the programme list the selected programme is displayed. If, however, the programme is not currently being broadcast, the `Long Info' menu is displayed (see next page). You can set this menu so that only the programme types you wish to view are displayed in the programme list column. Repeat Step 2 for all the programme types you wish to have in your list. Dual Sound This option allows you to alter the sound settings when the TV is in PAP mode. The settings available are: Stereo: The sound from one screen is output to both the TV loudspeakers and the headphones. PAP: The sound from the left screen is output to the TV loudspeakers and the sound from the right screen is output to the headphones. Notes: * When `Dolby V' is selected, the TV simulates the full effects of Dolby Pro Logic Surround sound without the need for additional speakers. This system enhances clarity, detail, presence of sound and increases musical realism. This menu allows you to set the sleep timer and to set a signal to be output from the AV3 socket. The table below explains each option and how to use it: Auto Format With this option switched on, the TV can automatically adjust the picture size to suit the broadcast. When viewing 4:3 or 14:9 broadcasts there will be dark areas visible at the edge of the screen. Sleep Timer This option allows you to set a period of time after which the TV switches itself into standby mode. this can be in 10 minute intervals up to a maximum of 90 minutes. AV3 Output This option allows you to set which signal source is output from the AV3 scart socket (labelled 3/ s 3 ) on the rear of the TV. [. . . ] Connect your equipment as shown in the above illustration. Press the / button on the remote control until the correct symbol for your equipment appears on the TV screen (see table below) On Screen Symbol The picture (if any) from this equipment appears on the TV screen. To avoid picture distortion do not connect equipment to the G and H sockets at the same time. The remote control supplied with your TV operates not only Sony VCRs and DVD players, but also those made by other manufacturers. [. . . ]