User manual SONY KV-4000

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Reorient or relocate the receiving antennas. Increase the separation between the equipment and receiver. [. . . ] For details, see "Using the Audio Menu" on page 66. Press Vv B b to move the VCR or DVD player's onscreen cursor. Press to change to the VHF/UHF output of the VCR. Press to turn on and off the VCR or DVD player. Use the A/V slide switch to control connected video equipment. You can program one video source for each switch position. For details, see "Programming the Remote Control" on page 43. Press repeatedly to step through the Audio Effect options. Press to select an item in the VCR or DVD player's menu. Press to display the DVD player setup menu. SETUP SETUP SETUP 42 Programming the Remote Control The remote control is preset to operate Sony brand video equipment. SETUP Sony Equipment Switch Position on Remote Control Programmable Code Number Beta, Ed Beta VCRs 8 mm VCR VHS VCR DVD player AV1 AV2 AV3 DVD 303 302 301 751 If you have video equipment other than Sony brand that you want to control with the TV's remote control, use the following procedure to program the remote control. SETUP The equipment must have infrared (IR) remote capability in order to be used with the remote control. Remote Control 1 Turn to the list of "Manufacturer's Codes" on page 44, and find z If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment. If you enter a new code number, the code number you previously entered at that setting is erased. For details, see "Connecting Optional Equipment" on page 21. Sources connected to the AUX, VIDEO 5, VIDEO 6, and VIDEO 7 inputs display in the left Twin View window, but not the right. If you are viewing a 4:3 source and a 16:9 enhanced source (such as a DVD) side by side in Twin View, the 4:3 source appears larger. Twin View does not display channels that are blocked by parental settings (see page 70). SETUP SETUP 48 , Activating the Picture To activate the picture in the right window Move the joystick b. To activate the picture in the left window Move the joystick B. SETUP , , Functions Available in the Active (Highlighted) Window To Do This . . . Do This . . . SETUP Tune to a channel Press 0-9 and then ENTER (or wait 3 seconds) or Press CH+/Press VOL +/Press MUTING (press again to unmute) Press ANT (left window only) SETUP Adjust the volume Mute the volume Switch the TV's input between sources connected to the TV's VHF/UHF and AUX inputs Switch the TV's input between sources connected to the TV's A/V inputs Change the picture size Press TV/VIDEO Features SETUP SETUP Move the joystick V or v. (For details, see "Changing the Picture Size" on page 50. ) 49 SETUP Changing the Picture Size The zoom feature lets you vary the relative size of the left and right pictures. 1 Move the joystick B or b to activate the picture that you want to resize. 2 Move the joystick V to enlarge the picture. 3 Move the joystick v to make the SETUP picture smaller. SETUP Features SETUP When you adjust the picture sizes, the TV memorizes the change. The next time you use the Twin View function, the memorized sizes appear. SETUP 50 Using Favorite Channels The Favorite Channels feature lets you select programs from a list of up to eight favorite channels that you specify. SETUP Creating a List of Favorite Channels z For details on using the Channel Menu, see page 68. 1 Press MENU to display the Menu. 2 Move the joystick B or b to highlight the Channel icon and press . 3 Press to select Favorite Channels. 4 Move the joystick V or v to highlight a Favorite Channel number (1-8) and press . SETUP 5 Move the joystick V or v to highlight a channel you want to assign to the Favorite Channel number. A preview of the highlighted channel appears in the upper right of the screen. Press to select that channel as a Favorite Channel. 6 To add more channels to your favorites list, repeat steps 4-5. To clear a Favorite Channel, move the joystick V or v to highlight the channel you want to clear. [. . . ] In the Audio Menu (see page 66), set the MTS setting to Stereo. If already set to Stereo, switch to Mono (which may reduce background noise during weak stereo broadcasts). If the Speaker option is set to Off and the Audio Out option is set to Fixed (in order to output the sound to your audio system) use your audio receiver to adjust the sound (see page 66). Or, to use the TV remote control, set the Audio Out option to Variable. [. . . ]