User manual SONY LBT-D590

[. . . ] And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. [. . . ] or >+ on the remote) to select tracks during recording pause mode (after step 4 and before step 6). · For recording from an album of MP3 audio tracks manually: Press PLAY MODE repeatedly until "ALBM" lights up in the display and then press ALBUM +/­ to select the album you want. · You can mix the sound from the component connected to the GAME INPUT jacks with another function such as CD, tape, radio, VCR or turntable connected to this system. To record the mixed sound (page 26), press GAME MIXING after step 4 of "Manual Recording" and then press REC PAUSE/ START to start recording. Adjusting the sound You can reinforce the bass and create a more powerful sound. Press X-GROOVE. Each time you press the button, the display changes as follows: X-GROOVE OFF Y X-GROOVE ON Tip Sound Adjustment The default setting is "X-GROOVE ON". 21GB Selecting the preset effect Press one of the Preset Effect buttons to select the preset effect you want. The preset effect name appears in the display. See the chart "Preset effect options. " Adjusting the graphic equalizer and storing the personal file You can adjust the sound by raising or lowering the level of specific frequency band, then store up to a personal file (P FILE) in the memory. Before adjustment, select the preset effect you want for your basic sound. Preset effect options "SURR" lights up in the display if you select an effect with surround effects. Effect For 1 SALSA REGGAE POP SAMBA TANGO ROCK JAZZ DANCE MOVIE GAME standard music sources Press < or , repeatedly to select a frequency band, then press M or m repeatedly to adjust the level. Frequency band Frequency level soundtracks and special listening situations play station 1, 2 and other video game music source 2 Press and hold down P FILE until "P FILE MEMORY" appears in the display. To cancel the effect Press EFFECT ON/OFF repeatedly until "EFFECT OFF" appears in the display. Tip The setting is stored automatically in the personal file. The previous setting stored at this memory location is erased and replaced by the new setting. To call up the personal file Press P FILE. Tip You can also select the preset effect including the personal file by pressing EQ on the remote repeatedly. If you do not want to store a personal file, press ENTER after step 1. 22GB Selecting the surround effect Press SURROUND. Selecting the MP3 Booster effect You can improve the sound quality of MP3 audio tracks during playback. Each time you press the button, the display changes as follows: SURROUND ON Y SURROUND OFF Note 1 2 Press AMP MENU repeatedly to select "MP3 BOOSTER". The last selected MP3 booster setting appears in the display. Press < or , repeatedly to select the setting you want. When you select certain preset effect, the surround effect may be canceled. Sound Adjustment The display changes as follows: BOOSTER OFF y BOOSTER ON 3 Press ENTER. Note You can only listen to MP3 Booster effect during playback of MP3 audio tracks. 23GB Creating a party environment (FST-ZX8/LBT-ZX8 only) You can create a party environment by using X-ROUND for "moving" sound effect or/and FLASH for flashing effect. To enjoy the X-ROUND mode, place your front and surround speakers at an equal distance from your listening position (see Example 2 of "Positioning the speakers for FST-ZX8/ LBT-ZX8 only" on page 10). To cancel the X-ROUND effect Press X-ROUND ON/OFF repeatedly until "X-ROUND OFF" appears in the display. The X-ROUND indicator turns off. Notes · If you cannot get the sound effect you want, check the speaker connections. · When the headphones are connected to the PHONES jack, X-ROUND mode is automatically changed to "X-ROUND OFF" and you cannot change this setting. Flashing sound effect -- FLASH Moving sound effect -- X-ROUND With the flash function, you can flash the sound output. remaining time** Change the time Press SLEEP repeatedly to select to turn off the time you want. Cancel the Sleep Press SLEEP repeatedly until Timer "SLEEP OFF" appears in the display. ** You cannot check the remaining time if you select "AUTO". Notes Turn VOLUME +/­ (or press VOLUME + or ­ on the remote) to adjust the volume. Press CLOCK/TIMER SET. "PLAY SET?" flashes in the display. Press ENTER. "ON" appears and the hour indication flashes in the display. Set the time to start playback. · Do not set to "AUTO" during CD Synchro Recording on a tape. · The "SLEEP" lights up in the display when the Sleep Timer is activated. Tip Press M or m (or >+ or ­. on the remote) repeatedly to set the hour, then press ENTER. The minute indication flashes in the display. on the remote) repeatedly to set the minute, then press ENTER. You can use the Sleep Timer, even if you have not set the clock. 6 7 Set the time to stop playback following the same procedure as step 5. on the remote) repeatedly until the music source you want appears in the display. The display changes as follows: t TUNER y CD PLAY T t TAPE PLAY T continued 27GB 8 Press ENTER. The type of timer, followed by start time, stop time and the music source appears in the display. Timer recording radio programs You can record from a preset radio station at the specified time. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 16) and set the clock (see "Setting the clock" on page 11). 9 To Press ?/1 to turn off the system. Other operations Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press M or m (or >+ or ­. on the remote) repeatedly until "PLAY SELECT?" flashes in the display, then press ENTER. [. . . ] ­ Discs that have labels printed using a special ink that feels tacky when touched. · Discs with non-standard shapes (e. g. , heart, square, star) cannot be played on this system. Attempting to do so may damage the system. Do not use such discs. On placement · Do not place the system in an inclined position. [. . . ]