User manual SONY LBT-D670AV

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] First the required tape length for the CD in the playing position appears, then the total playing time for sides A and B appears. Skip step 5 to select tracks from the same disc. You cannot use this function when Program Play mode has been set. After clearing the entire program, follow the above procedure (see "Clear the entire program" in the table on page 23). With the Loop function, you can repeat part of a CD during playback. This lets you create original recordings. With the Flash function, you can "flash" the CD sound during playback. This lets you create original recordings. Playback at the point you want to start the Loop function, and release to resume normal playback. to adjust the loop length Turn the jog dial while holding LOOP (or press FILE SELECT V/v while holding LOOP on the remote) to select different loop lengths. Playback at the point you want to start the Flash function, and release to resume normal playback. The Synchronized Equalizer function is canceled also when: ­ you cancel the audio emphasis ­ you reselect the audio emphasis from the music menu ­ you activate the surround effect ­ you adjust the graphic equalizer ­ you sing along (KARAOKE) Notes P FILE MEMORY does not work in this mode. ⷠThe classification is not related to the genre of the music source. You can adjust the audio emphasis using the graphic equalizer and surround effect. You can adjust the sound by raising or lowering the levels of specific frequency ranges. You can change the equalizer display according to the music you are listening to. Every time you press this button, the display changes as follows: IMAGE PATTERN y NORMAL PATTERN You can enjoy the surround effect. Every time you press this button, the display changes as follows: SURROUND ON y SURROUND OFF Note If you choose other sound effects, the surround effect will be canceled. Repeat steps 3 and 4 to adjust the other frequency bands. If you choose another audio emphasis (other than "EFFECT OFF"), the adjusted sound effect is lost. To retain the adjusted sound effect for future use, store it in a personal file (see "Making a personal audio emphasis file" on page 32). You can create personal files of audio patterns (surround effect and graphic equalizer) and store them in the system's memory. [. . . ] Move the microphone away from the speakers or change the direction of the microphone. Turn off the TV set once, then turn it on after 15 to 30 minutes. The display starts flashing as soon as you plug in the power cord even though you haven't turned on the system (demonstration mode). ⷠPress DISPLAY (for LBT-LX50/LX30/ LX7/LX5) or DEMO (STAND BY) (for other models) while the system is off. [. . . ]