User manual SONY LBT-DR8AV

[. . . ] The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] to adjust the flash length Turn the jog dial while holding FLASH (or press FILE SELECT V/v while holding FLASH on the remote) to select different flash lengths. To use LOOP and FLASH together You can create a more powerful sound and listen with headphones. The volume switches to power mode, the sound effect changes, the super woofer level changes to "HIGH, " and the indicator on the GROOVE button lights up. Press GROOVE again to return to the previous volume. The bass frequencies of the music you are listening to are measured and those areas with heavy bass tones are effectively reinforced. the indicator on the SYNC BASS button flashes while measuring. Once measured, the indicator stops flashing and remains lit. Press SYNC BASS again to return to the previous level. If you press MODE in the SYNC BASS mode, this mode is canceled and the super woofer mode changes to MOVIE. You can change the super woofer level to LOW or HIGH in the SYNC BASS mode. However, if you change the level to SUPER WOOFER FLAT, the SYNC BASS mode is canceled. Each time you press this button, the super woofer level display changes as follows: SUPER WOOFER FLAT n LOWn HIGH n No sound will come from the speakers. Each time you press this button, the super woofer mode display changes as follows: MOVIE ~ MUSIC The audio emphasis menu lets you select the sound characteristics according to the music you are listening to. And you can also enjoy the audio emphasis using the Synchronized Equalizer function. When using this function, the system automatically switches the equalizer according to the genre of the music. The Personal File function (see "Making a personal audio emphasis file (Personal File)" on page 34) lets you store your own effects. "SUR " appears if you select an audio emphasis with a surround effect. You can set the audio emphasis to change automatically according to the beat and tempo of the music. The indicator on the SYNC EQ button flashes while measuring the beat and tempo of the source. Once measured, the indicator stops flashing and remains lit. When using the remote, press FILE SELECT V/v repeatedly until the desired audio emphasis name appears. Press SYNC EQ again so the indicator goes off. [. . . ] press PRO LOGIC to turn off the Pro Logic mode. There is no sound from the center speaker. There is no sound from the rear speakers. The software being played back has limited sound effects. [. . . ]