User manual SONY LBT-G1300

[. . . ] The AC power cord has been fixed on the rear panel with the plug band temporarily for shipment. Follow steps 1 through 5 to hook up your system using the supplied cords and accessories. Keep the speaker cords away from the antennas to prevent noise. Inserting the vinyl portion will interfere with the speaker connection and no sound will come from the speaker. [. . . ] Playing CD tracks in random order -- Shuffle Play You can play all the tracks on one CD or all the CDs in random order. Press PLAY MODE repeatedly until "SHUFFLE" or "PROGRAM" disappears from the display. The tracks continue playing in their original order. You can start Shuffle Play during Normal Play by pressing PLAY MODE repeatedly until "SHUFFLE" appears in the display. To skip a track, turn the jog dial clockwise (or press AMS + on the remote). You can create a program of up to 32 tracks from all the CDs in the order you want them to be played. Turn the jog dial until the desired track appears in the display. Disc number Track number "STEP" and the programmed playing order appear, followed by the total playing time. To program additional tracks, repeat steps 4 through 6. Skip step 4 to select tracks from the same disc. press · All the tracks play in the order you selected. Adjust the bass slowly while listening to the music so you can monitor the effect of the adjustment. * Each time you press this button, the DBFB level display changes as follows: n DBFB n DBFB n display off Each time you press this button, the super woofer level display changes as follows: SUPER WOOFER FLAT n LOW n HIGH n The audio emphasis menu lets you select the sound characteristics according to the music you are listening to. The personal file function (see "Making a personal audio emphasis file (Personal File)") lets you store your own effects. "SUR " appears if you select an audio emphasis with a surround effect. Each time you press SPECTRUM ANALYZER, the equalizer display changes to show one of the four displays below. You can adjust the audio emphasis using the graphic equalizer and surround effect. You can adjust the sound by raising or lowering the levels of specific frequency ranges. Before operation, first select the basic audio emphasis you want for your sound. Repeat steps 3 and 4 to adjust the other frequency bands. If you choose another audio emphasis (other than "EFFECT OFF"), the adjusted sound effect is lost. To retain the adjusted sound effect for future use, store it in a personal file (see "Making a personal audio emphasis file"). [. . . ] The display starts flashing as soon as you plug in the power cord even though you haven't turned on the system (demonstration mode). The demonstration appears automatically the first time you plug in the power cord, or if there is a power outage lasting longer than half a day. In this case, reset the following: -- Clock setting (see "Step 3: Setting the time") -- Press DISPLAY/DEMO while the system is off. Insert only the stripped portion of the speaker cord into the SPEAKER jack. [. . . ]