User manual SONY LBT-LCD7DI

[. . . ] WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Note Playback settings stored in the disc take priority over the LCD settings. Therefore, some of the LCD settings may not be performed. Getting Started Operating a Sony TV You can use the following buttons to operate a Sony TV. These buttons have been marked in yellow. To Turn the TV on or off Switch the TV's input source between the TV and other input sources Select the TV channels Press TV / while holding down TV. TV INPUT while holding down TV. 1 2 Press OPTIONS on the unit repeatedly until "PICTURE MODE" or "WIDE MODE" appears in the LCD. Press or repeatedly to select the desired setting, then press ENTER. TV CH +/ or numeric buttons* while holding down TV. Adjust the TV VOL +/ while volume of the TV holding down TV. speaker(s) * For double digit number, hold down TV and press -/-- , then press the number. (For example, hold down TV, press -/-- , then 2 and 5 for entering 25. ) Continued 1GB Setting the LCD The default setting is underlined. PICTURE MODE Allows you to select options best suited for videos and pictures, respectively. VIVID: Enhances picture contrast and sharpness. WIDE MODE FULL: Select this when you view pictures in a 16:9-format. This setting displays pictures in full screen mode. NORMAL: Select this when you view pictures in a 4:3-format. This setting displays a normal picture with bands on the left and right portions of the screen. Setting the clock Use buttons on the remote to set the clock. 1 2 Press / to turn on the system. Press TIMER MENU. The hour indication flashes in the display. If "PLAY SET?" flashes in the display, press or repeatedly to select "CLOCK SET?, " then press ENTER. 3 4 Press or repeatedly to set the hour, and then press ENTER. Use the same procedure to set the minutes. Note The clock settings are canceled when you disconnect the power cord or if a power failure occurs. To display the clock when the system is off Press DISPLAY repeatedly until the clock is displayed. The clock is displayed for about 8 seconds. GB Performing "QUICK" setup Before using the system, you can make the minimum basic adjustments in "QUICK" setup. If you do not want to perform "QUICK" setup, press CLEAR in step 3. The guide message will disappear from the TV screen. 4 Press ENTER without loading a disc. "LANGUAGE SETUP" appears on the TV screen. Getting Started 1 2 Turn on your TV and select the video input*. * This step is not required when using the LCD for performing "QUICK" setup. 5 Press or repeatedly to select a language, then press ENTER. The setting is selected and "VIDEO SETUP" appears on the TV screen. Tips The selected language is for "OSD, " "MENU" and "SUBTITLE . " The selectable language is different depending on the area. Press / to turn on the system. Notes Make sure there is no disc in the unit. [. . . ] TRACK1): repeats the current audio file. FILE2): repeats the current file. 1) 2) Notes You can also change the Repeat Play setting by pressing REPEAT/FM MODE repeatedly. Depending on the DVD VIDEO, you cannot perform Repeat Play. You cannot perform Repeat Play with VIDEO CDs during PBC playback. [. . . ]