User manual SONY LBT-ZX66I

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This caution label is located inside the unit. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Each time you press this button in Normal Play, the display changes as follows: N Elapsed time on the current track Remaining time on the current track Remaining time on the current CD (1 DISC mode) or "PLAY" (ALL DISCS mode) Clock display (for a few seconds) Effect (P FILE) name or "EFFECT ON (OFF)" n All the tracks on all CDs Only one track* n n n 1/ALL DISCS REPEAT The following table describes the various repeat modes. To repeat All the tracks on the current CD Press 1/ALL DISCS repeatedly until "1 DISC" appears in the display. 1/ALL DISCS repeatedly until "ALL DISCS" appears in the display. REPEAT repeatedly while playing the track you want to repeat until "REPEAT 1" appears in the display. To check the total playing time and the number of tracks on a CD press DISPLAY/DEMO in stop mode. If you press DISPLAY/DEMO again, the clock display appears for a few seconds then the display returns to the previous indication. * You can't repeat a single track during Shuffle Play and Program Play. Press REPEAT repeatedly until "REPEAT" or "REPEAT 1" disappears from the display. Playing CD tracks in random order -- Shuffle Play You can play all the tracks on one CD or all the CDs in random order. Press PLAY MODE repeatedly until "SHUFFLE" or "PROGRAM" disappears from the display. The tracks continue playing in their original order. To use LOOP and FLASH together With the Wave function, you can fluctuate the graphic equalizer automatically while listening to a source. This effect can be used with any source, but it cannot be recorded. Listening to a source at the point you want to start the Wave function, and release to resume normal playback. to adjust the wave length Turn the jog dial while holding WAVE to select different wave lengths. You can reinforce the bass, create a more powerful sound, and listen with headphones. Each time you press this button, the super woofer mode display changes as follows: MOVIE ~ MUSIC The volume switches to power mode, the equalizer curve changes, the bass level (DBFB or SUPER WOOFER) changes to "HIGH, " and the indicator on the GROOVE button lights up. Press GROOVE again to return to the previous volume. The music sound will be distorted when you use the DBFB system with the graphic equalizer if the bass is too strong. Adjust the bass slowly while listening to the music so you can monitor the effect of the adjustment. * Each time you press this button, the DBFB level display changes as follows: n DBFB n DBFB n display off Each time you press this button, the super woofer level display changes as follows: n SUPER WOOFER FLAT n LOWn HIGH The audio emphasis menu lets you select the sound characteristics according to the music you are listening to. The personal file function (see "Making a personal audio emphasis file (Personal File)") lets you store your own effects. [. . . ] DAILY 1, DAILY 2, and REC do not appear when you press t/CLOCK SET. There is an obstacle between the remote and the unit. Move the microphone away form the speakers or change the direction of the microphone. Turn off the TV set once, then turn it on after 15 to 30 minutes. [. . . ]