User manual SONY LBT-ZX80D

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] If you press H (or nN on the unit) when the TAPE A function is selected and there is no tape in Deck A, the system automatically switches to the TAPE B function when there is a tape in Deck B and vice versa. Recording your favorite disc onto a tape You can record a whole disc onto a tape. the recording level is adjusted automatically. Use the buttons on the unit for the operation. Press DVD and load a disc you want to record. The CD Synchro Recording function cannot perform under the following conditions: ­ During playback of the disc. When CD Synchro Recording starts, ­ the setting for Repeat Play changes to "REPEAT OFF". When you record from a VIDEO CD, PBC playback is automatically canceled. If you connect or disconnect a microphone or headphone during recording, the sound may cut off for a moment. Press DIRECTION repeatedly to select "g" to record on one side or "j" (or "RELAY") to record on both sides. When recording from the reverse side: After step 1 of "Recording your favorite disc onto a tape" (page 55), press TAPE A/B repeatedly until "TAPE B" appears in the display. Press nN repeatedly until the TAPE B reverse side indicator lights up to start playback of the reverse side. When recording on both sides: Be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. You can record just the portions you like from a disc, tape or radio program onto a tape. You can also record from connected components (see "Hooking up optional components" on page 76). Use the buttons on the unit for the operation. You cannot listen to other sources while recording. When you press CD SYNC, the sound field is automatically changed to LINK if the current sound field is SBS MULTI, A. press DVD , TUNER/BAND , TAPE A/B , TV/SAT or VIDEO to select the source you want to record. Load the disc, tape or tune to the station you want to record. Press DIRECTION repeatedly to select "g" to record on one side or "j" (or "RELAY") to record on both sides. [. . . ] Each region code is shown on the unit as well as on the disc packaging. The system can play back the discs that match its region code. The system can also play back discs with the " " mark. Even when the region code is not shown on the DVD VIDEO, the region limit may still be activated. [. . . ]