User manual SONY LBT-D105

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] After the last track, "CHECK END" appears. Press PLAY MODE repeatedly until "PROGRAM, " "ALL DISCS SHUFFLE, " or "1 DISC SHUFFLE" disappears from the display. With the Loop function, you can repeat part of a CD during playback. This lets you create original recordings. With the Flash function, you can "flash" the CD sound during playback. This lets you create original recordings. Playback at the point you want to start the Loop function, and release to resume normal playback. to adjust the loop length Turn the jog dial while holding LOOP (or press FILE SELECT V/v while holding LOOP on the remote) to select different loop lengths. Playback at the point you want to start the Flash function, and release to resume normal playback. to adjust the flash length Turn the jog dial while holding FLASH (or press FILE SELECT V/v while holding FLASH on the remote) to select different flash lengths. To use LOOP and FLASH together You can create a more powerful sound and listen with headphones. You can adjust the audio emphasis using the graphic equalizer and surround effect. You can adjust the sound by raising or lowering the levels of specific frequency ranges. You can change the equalizer display according to the music you are listening to. Every time you press the button, the display changes as follows: Image pattern ~ Normal pattern The Surround Menu lets you select the sound characteristics according to the sound you are listening to. Repeat steps 3 and 4 to adjust the other frequency bands. If you choose another audio emphasis (other than "EFFECT OFF"), the adjusted sound effect is lost. To retain the adjusted sound effect for future use, store it in a personal file (see "Making a personal audio emphasis file" on page 34). Each time you press this button, the menu changes as follows: OFF: Deactivates the DSP mode. If you choose other sound effects, the surround effect will be canceled. You can create personal files of audio patterns (surround effect and graphic equalizer) and store them in the system's memory. Later, you can call up an audio pattern when playing a favorite tape, CD, or radio program. [. . . ] Move the microphone away from the speakers or change the direction of the microphone. Turn off the TV set once, then turn it on after 15 to 30 minutes. There is no sound from the speakers except the center speaker. The source being played back is monaural. [. . . ]