User manual SONY LBT-D107

[. . . ] This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. This caution label is located inside the unit. This stereo system is equipped with the Dolby* Btype noise reduction system. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. [. . . ] The recording level is adjusted automatically. 5 6 Press P on deck B. Recording starts. Start playing the source to be recorded. To Stop recording Pause recording Press p on deck B P on deck B 2 Tips · If you want to record on the reverse side, press ª so the indicator on the ª button (for the reverse side) lights up green. · When you want to reduce the hiss noise in lowlevel high-frequency signals, press DOLBY NR before step 5 so "DOLBY NR B" appears in the display. 4 DOLBY NR 1 2 3 ª p 5 13 Insert a blank tape into deck B. Press FUNCTION repeatedly until the source you want to record (e. g. , CD) appears in the display. Press r REC. Deck B stands by for recording, and the indicator on the · button (for the front side) lights up green. 4 Press DIRECTION repeatedly to select A to record on one side or ß (or RELAY) to record on both sides. 23 Recording CDs by specifying the track order -- Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. 1 2 3 4 5 6 Place CDs and close the front cover. Press FUNCTION repeatedly until "CD" appears in the display. Press PLAY MODE repeatedly until "PROGRAM" appears in the display. Turn the jog dial until the desired track appears in the display. LBT-D107/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 12 2 1113 p 3 p Disc number Track number DOLBY NR OFF DISC PROGRAM Total playing time (including selected track) LBT-XB66/XB66K/XB660 Disc number Track number DOLBY NR OFF 915 EDIT 6 4, 7 DISC PROGRAM Total playing time (including selected track) CHECK 24 7 Press PLAY MODE once. The track is programmed. "STEP" and the programmed playing order appear, followed by the total playing time. LBT-D107/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 12 Press DIRECTION repeatedly to select A to record on one side or ß (or RELAY) to record on both sides. The last programmed track DOLBY NR OFF 13 Press P on deck B. Recording starts. To stop recording DISC PROGRAM Press p on deck B or on the CD player. To check the order Total playing time LBT-XB66/XB66K/XB660 Press CHECK on the remote repeatedly. After the last track, "CHECK END" appears. The last programmed track DOLBY NR OFF To cancel Program Edit Press PLAY MODE repeatedly until "PROGRAM" or "SHUFFLE" disappears from the display. DISC PROGRAM Total playing time 8 Repeat steps 5 through 7 to program additional tracks to be recorded on side A. Skip step 5 to select tracks from the same disc. Selecting the tape length automatically -- Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing more than 20 tracks. 9 Press P to insert a pause at the end of side A. "P" appears in the display and the total playing time resets to "0. 00" in the display. / After inserting a CD, press EDIT once so "EDIT" flashes. The required tape length for the CD in the playing position appears, followed by the total playing time for sides A and B. Press ENTER when finished. 6 2 3, 4 Note If you choose another audio emphasis (other than "EFFECT OFF"), the adjusted sound effect is lost. To retain the adjusted sound effect for future use, store it in a personal file (see "Making a personal audio emphasis file"). Activating the surround effect 1 2 3 You can enjoy the surround effect. Select the basic audio emphasis you want for your sound (see "Selecting the audio emphasis"). Press GEQ CONTROL. The frequency range appears and the level value flashes in the display. SURROUND ­ + 9 Press GEQ B/b repeatedly to select a frequency band. LBT-D107/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 DOLBY NR OFF ª ª ª ª / Press SURROUND so "SUR appears in the display. Note " ALL DISC S LBT-XB66/XB66K/XB660 DOLBY NR OFF ALL DISC S 63 250 1K 4K 16K(Hz) If you choose other sound effects, the surround effect will be canceled. To retain the effect, store it in a personal file (see "Making a personal audio emphasis file"). 30 Making a personal audio emphasis file -- Personal File You can create personal files of audio patterns (surround effect and graphic equalizer) and store them in the unit's memory. Later call up an audio pattern to play a favorite tape, CD, or radio program. Before operation, first select the basic audio emphasis you want for your sound. 4 Press ENTER. The adjusted sound effects are stored under the selected file number. Any settings previously stored at this memory location are erased and replaced by the new settings. To call up the personal file 1 Press GEQ V/v (or MUSIC MENU V/v on the remote) repeatedly to display the last selected personal file. 2 Press GEQ B/b (or MUSIC MENU B/b on the remote) repeatedly to select the desired personal file. 243 1 Create the sound effect you want by using the graphic equalizer and surround effect (see "Adjusting the audio emphasis"). Press P FILE MEMORY. A personal file number appears in the display. LBT-D107/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 DOLBY NR OFF 2 ALL DISC S LBT-XB66/XB66K/XB660 DOLBY NR OFF ALL DISC S 3 Press GEQ B/b to select the file number (P FILE) where you want to store the sound effect. 31 Other Features Using the Radio Data System (RDS) (For European model only) What is the Radio Data System? The Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features, such as monitoring traffic, news, or information programs and locating a station by program type. RDS is available only on FM stations. * Note RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly or if the signal strength is weak. [. . . ] ·The record/playback heads are magnetized. There is excessive wow or flutter, or the sound drops out. ·The capstans or pinch rollers are dirty. Noise increases or the high frequencies are missing. [. . . ]