User manual SONY LBT-D115CD

[. . . ] This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. This caution label is located inside the unit. NOTICE FOR THE CUSTOMERS IN CANADA CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. This stereo system is equipped with the Dolby Pro Logic Surround system* and the Dolby B-type noise reduction system. [. . . ] For example, you can record just the songs you want or begin recording from the middle of the tape. The recording level is adjusted automatically. 5 6 Press P on deck B. Recording starts. Start playing the source to be recorded. To Stop recording Pause recording Press p on deck B P on deck B 2 Tips · If you want to record on the reverse side, press ª so the indicator on the ª button (for the reverse side) lights up green. · When you want to reduce the hiss noise in lowlevel high-frequency signals, press DOLBY NR before step 5 so "DOLBY NR B" appears in the display. 4 DOLBY NR 1 2 3 ª p 513 Insert a blank tape into deck B. Press FUNCTION repeatedly until the source you want to record (e. g. , CD) appears in the display. Press r REC. Deck B stands by for recording, and the indicator on the · button (for the front side) lights up green. 4 Press DIRECTION repeatedly to select A to record on one side or ß (or RELAY) to record on both sides. 26 Recording CDs by specifying the track order -- Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. 1 2 3 4 5 6 Place CDs and close the front cover. Press FUNCTION repeatedly until "CD" appears in the display. Press PLAY MODE repeatedly until "PROGRAM" appears in the display. Turn the jog dial until the desired track appears in the display. Disc number Track number DOLBY NR OFF 12 2 1113 p 3 p DISC PROGRAM Total playing time (including selected track) 7 Press PLAY MODE once. The track is programmed. "STEP" and the programmed playing order appear, followed by the total playing time. The last programmed track 915 EDIT 6 4, 7 DISC PROGRAM DOLBY NR OFF Total playing time CHECK 8 Repeat steps 5 through 7 to program additional tracks to be recorded on side A. Skip step 5 to select tracks from the same disc. 9 Press P to insert a pause at the end of side A. "P" appears in the display and the total playing time resets to "0. 00" in the display. continued 27 Recording CDs by specifying the track order (continued) Selecting the tape length automatically -- Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing more than 20 tracks. 10 Repeat steps 5 through 7 to program the tracks to be recorded on side B. Skip step 5 to select tracks from the same disc. 11 Press CD SYNC. Deck B stands by for recording, the CD player stands by for playback, and the indicator on the · button (for the front side) lights up green. / After inserting a CD, press EDIT once so "EDIT" flashes. The required tape length for the CD in the playing position appears, followed by the total playing time for sides A and B. Press ENTER when finished. Note If you choose another audio emphasis (other than "EFFECT OFF"), the adjusted sound effect is lost. To retain the adjusted sound effect for future use, store it in a personal file (see "Making a personal audio emphasis file"). 6 2 3, 4 1 2 3 Select the basic audio emphasis you want for your sound (see "Selecting the audio emphasis"). Press GEQ CONTROL. The frequency range appears and the level value flashes in the display. Press GEQ B/b repeatedly to select a frequency band. DOLBY NR OFF ALL DISC S 63 250 1K 4K 16K(Hz) continued 33 Adjusting the audio emphasis (continued) Adjusting the DSP level Activating the surround effect The Surround Menu lets you select the sound characteristics according to the sound you are listening to. DSP DSP LEVEL / Press DSP LEVEL on the remote to select the DSP level. / Press DSP (or DSP MODE on the remote) until the desired DSP mode appears in the display. Each time you press this button, the menu changes as follows: DSP OFF: Deactivates the DSP mode HALL: Reproduces the acoustics of a concert hall THEATER: Reproduces the acoustics of a movie theater Notes · If you choose other sound effects, the surround effect will be canceled. To retain the effect, store it in a personal file (see "Making a personal audio emphasis file"). · You can adjust the DSP level when the DSP mode is activated. 34 n Each time you press this button, the level changes as follows: LEVEL 1 n 2 n 3 Making a personal audio emphasis file -- Personal File You can create personal files of audio patterns (surround effect and graphic equalizer) and store them in the unit's memory. Later call up an audio pattern to play a favorite tape, CD, or radio program. Before operation, first select the basic audio emphasis you want for your sound. 4 Press ENTER. The adjusted sound effects are stored under the selected file number. Any settings previously stored at this memory location are erased and replaced by the new settings. To call up the personal file 1 Press GEQ V/v (or MUSIC MENU V/v on the remote) repeatedly to display the last selected personal file. 2 Press GEQ B/b (or MUSIC MENU B/b on the remote) repeatedly to select the desired personal file. 423 1 Create the sound effect you want by using the graphic equalizer and surround effect (see "Adjusting the audio emphasis"). Press P FILE MEMORY. A personal file number appears in the display. DOLBY NR OFF 2 ALL DISC S 3 Press GEQ B/b to select the file number (P FILE) where you want to store the sound effect. 35 Enjoying Dolby Pro Logic Surround sound You can enjoy the Dolby Pro Logic Surround sound of Dolby Surround-encoded (q) videos and TV programs. Complete the setup and speaker adjustments first (see "Step 2: Setting up the speakers"). 1 1 Press PRO LOGIC (or PRO LOGIC ON/OFF on the remote) so the indicator on the PRO LOGIC button lights up. [. . . ] · No tape is in the cassette holder. · The tab has been removed from the cassette (see page 45). · The tape has reeled to the end. The tape does not record nor play, or there is a decrease in sound level. [. . . ]