User manual SONY LBT-G3000

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. Note on power cord plug shapes (Saudi Arabian model only) (The 13 A 3-pin plug is attached when shipped from the factory. The following caution label is located inside the apparatus. [. . . ] For Preset Tuning, you can use the numeric buttons to select a preset station. Press the numeric button(s) to enter the preset number and then press ENTER. When an FM stereo program has static noise, press FM MODE repeatedly until "MONO" lights up in the display. To record the radio programs, see "Recording onto a tape manually" (page 55) or "Timer recording radio programs" (page 70). Push b (Z A) or B (B Z) on the unit according to its direction to open the selected deck. Press H (or nN on the unit) again to play back the reverse side. With the side you want to play back or record facing forward The playback stops automatically after repeating the sequence five times. Relay Play follows this cyclic sequence up to five times, then stops: Deck A (front side) t Deck A (reverse side) t Deck B (front side) t Deck B (reverse side) Push b (Z A) or B (B Z) on the unit according to its direction when playback is stopped. Push the center of the tape lid to close the deck. Press DIRECTION on the unit repeatedly to select "g" to play back one side, "j"1) to play back both sides or "RELAY"2) (Relay Play) to play back both decks in succession. Do not push b (Z A) or B (B Z) on the unit while playing a tape, otherwise the tape could be damaged. Load the disc, tape or tune to the station you want to record. Press DIRECTION repeatedly to select "g" to record on one side or "j" (or "RELAY") to record on both sides. You can reinforce the bass and create a more powerful sound. Each time you press the button, the display changes cyclically as follows: GROOVE ON* t V-GROOVE ON* t GROOVE OFF When you press REC PAUSE/START, the sound field is automatically changed to LINK if the current sound field is SBS MULTI, A. You cannot listen to other sources while recording. When recording from the reverse side: After step 1 of "Recording onto a tape manually" (page 55), press TAPE A/B repeatedly until "TAPE B" appears in the display. Press nN repeatedly until the TAPE B reverse side indicator lights up to start playback of the reverse side. When recording on both sides: Be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. When recording from the radio: If noise is heard while recording from the radio, move the respective antenna to reduce the noise. When recording from a disc onto a tape manually: You can press . [. . . ] A function of the DVD VIDEO to limit playback of the disc by the age of the users according to the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback is completely prohibited, violent scenes are skipped or replaced with other scenes and so on. This system is used to protect copyrights. A region code is allocated on each DVD system or DVD VIDEO according to the sales region. [. . . ]