User manual SONY LF-V30

[. . . ] LocationFree® Base Station LF-V30 Operating Instructions Thank you for purchasing this product. Before reading this Operating Instructions, be sure to read the Important Notice. For detailed information on how to use the LocationFree® Player, refer to the LocationFree® Player's Help. This product is available for use in the U. S. [. . . ] 6 You can download the information required for the device registration via the Internet (Domain Name, Port Number, and Registration Password) on an encrypted file by clicking this button. Notes · Some web browsers do not support the downloading of the file for registration. · To register PSP® via the Internet, downloading the registration information is required. Download the file for registration to a folder (1 the following) in the Memory Stick DuoTM. Memory Stick (E:) /MSSONY/LF/REGISTER (The drive name depends on the computer. ) · PSP® system software version 2. 80 or later is required for registration. Base Station Settings Device Registration You can check the list of registered devices and delete unnecessary devices from the list. Also, you can disable device registration via the Internet, and can change the registration password which is required for registration via the Internet. z Tip To check whether device registration is complete, click [Update] under [List of Registered Devices]. Internet Connection 1 2 3 4 5 6 The [Internet Connection] frame allows you to set an IP address for your Base Station, according to your network environment. You can also check the Base Station's MAC addresses. To determine the address to set, contact your contracted ISP to the operating instructions of your modem or router. Note If you change the IP address or select [Automatic IP Address Configuration (DHCP)] in the [Internet Connection] frame and then click [Set], you will no longer be able to access the [Base Station Settings] screen because the IP address is changed. To open the [Base Station Settings] screen, click on the LocationFree® Player's Base Station list, and then click [Base Station Settings]. 1 A list of the devices currently registered with the Base Station appears here. The client nickname will be displayed differently depending upon the specifications of each registered device. When you want to update the list, click [Update]. 2 If you want to halt connection to the Base Station from a registered device, check the device in the "List of Registered Devices" list and click the [Delete] button. 26 1 2 3 4 5 6 7 8 Select whether to assign the DNS server automatically, or to assign the DNS server manually. The DNS server is only assigned automatically if [Automatic IP Address Configuration (DHCP)] is set for the IP address. If you select [Manual], enter the addresses of your ISP's DNS servers in the [DNS1] and [DNS2] fields. [Auto] is selected at the time of purchase. 9 Click this to save changes. 8 9 Wireless Settings (Access Point) When you set the WLAN switch to "AP, " you can change the wireless settings for the Access Point mode of the Base Station. If you have changed the settings of the Base Station, you should also change the wireless settings of the LocationFree® client devices. 1 Select whether to assign an IP address to the Base Station automatically, using the DHCP function of your router or modem, or to assign an IP address manually. If you select [Automatic IP Address Configuration (DHCP)], the router's DHCP server will automatically assign the [IP Address], [Subnet Mask] and [Default Gateway]. If you select [Manual], contact your contracted ISP to assign the proper values in the [IP Address], [Subnet Mask], [Default Gateway] and [Host Name] fields. At the time of purchase, this item is set to [Automatic IP Address Configuration (DHCP)]. 5 Enter a host name for the Base Station, as required. Base Station Settings 1 2 3 4 5 6 z Tip The host name can be specified only when [Automatic IP Address Configuration (DHCP)] is selected. 6 The Base Station's MAC addresses appear. 7 Depending on the operating environment, the domain name appears. 1 Wireless LAN devices that conform to the IEEE802a/b/g standards can be used on the following channels. When connecting your computer to the Base Station via a wireless connection, select a channel supported by the LAN device. [. . . ] 16 Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Video devices . . . . . . . . . . . . . . . . . . . . . . . 13 R Registering LocationFree® Client Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]